Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Sun Apr 28, 2024 10:48 pm

Board index » Selling stuff, want to buy stuff, and guys that sell and work on stuff » Parts Wanted

All times are UTC - 5 hours




Post new topic Reply to topic  Page 1 of 2
  [ 13 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
m in sc
PostPosted: Mon Oct 10, 2011 2:49 pm 
User avatar

Joined: Wed Jun 08, 2011 10:12 pm
Posts: 2162
need some upper legs for an S1 or S2 w/drum brake setup. Just need em to be straight and fairly rust free, at least at the important part. (seal contact area) Thanks!

-Mark
Top
 Profile  
 
m in sc
PostPosted: Thu Oct 13, 2011 6:50 pm 
User avatar

Joined: Wed Jun 08, 2011 10:12 pm
Posts: 2162
bump... c'mon guys!!!
:D
Top
 Profile  
 
suthernS2
PostPosted: Fri Oct 14, 2011 5:50 am 
User avatar

Joined: Thu Jun 09, 2011 6:36 am
Posts: 1368
Location: Inman,S.C.
I'm embarassed to say that I just threw a set in the scrap pile not too long ago.I did have to reuse a sleeve off them for my new fork tubes.Wish I'd known,they would have been yours.Sorry. :(
Top
 Profile  
 
m in sc
PostPosted: Fri Oct 14, 2011 5:46 pm 
User avatar

Joined: Wed Jun 08, 2011 10:12 pm
Posts: 2162
its cool. mine might be saveable. :)
Top
 Profile  
 
suthernS2
PostPosted: Sat Oct 15, 2011 7:00 am 
User avatar

Joined: Thu Jun 09, 2011 6:36 am
Posts: 1368
Location: Inman,S.C.
Gordon had a set redone.They looked decent. The forks by Frank were 200 bucks.I got a set of like new tires that I took off if you need them.FREE, if you want them.
Top
 Profile  
 
Jackman
PostPosted: Sat Oct 15, 2011 7:33 am 

Joined: Wed Jun 22, 2011 7:46 pm
Posts: 1334
Location: Kingston, N.Y.
My S2 parts bike has straight tubes but a bit rusted, I think there salvageable.

Image

_________________
1975 S3 project bike
1974 H1 project bike
1972 Yamaha R5
1974 Yamaha RD350
Top
 Profile  
 
m in sc
PostPosted: Sat Oct 15, 2011 2:44 pm 
User avatar

Joined: Wed Jun 08, 2011 10:12 pm
Posts: 2162
franks wants 259 to do the forks and another 35 to ship em. I can buy an inverted front end off ebay for that so... :) like said, im pretty sure mine are 'ok' but not sure, i need ot pull em apart. they do look like ass though.

tires? what kind? Im probably going to go with avons on this bike.

regarding the parts S2^, wheres the rust? can you take a closer pic of them?
Top
 Profile  
 
Jackman
PostPosted: Sat Oct 15, 2011 4:36 pm 

Joined: Wed Jun 22, 2011 7:46 pm
Posts: 1334
Location: Kingston, N.Y.
The rust on the parts S2 is on the fork tubes from the triple clamp down there is a coat of rust, the rust will prob;y come off with soapy steel wool but there will be some pitting for sure. I can't post pics that a skill that I have not quite mastered...

_________________
1975 S3 project bike
1974 H1 project bike
1972 Yamaha R5
1974 Yamaha RD350
Top
 Profile  
 
Ja-Moo
PostPosted: Sat Oct 15, 2011 5:19 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
m in sc wrote:
franks wants 259 to do the forks and another 35 to ship em. I can buy an inverted front end off ebay for that so... :)


Upside down forks are for woosies.......... :e11

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........
Top
 Profile  
 
Sakibomb
PostPosted: Wed Oct 19, 2011 7:53 am 

Joined: Wed Oct 19, 2011 7:20 am
Posts: 22
Location: Indianapolis
I'm from the old board but I've also got the front end from my s1 in the shed ready for the scrap yard. I've got the drum, forks, triple tree, probably speedo cable. I'll look tonight and help out. I've got the old spoke drum wheel as well if you need it. Its all crap I'm tired of moving from one shelf to another.

_________________
"I got my proc exam today and something bothers me. He was a dentist" - Friend at work
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 13 posts ]  Go to page 1, 2  Next

Board index » Selling stuff, want to buy stuff, and guys that sell and work on stuff » Parts Wanted

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group