Kawi2strokes.com Forum
http://www.kawi2strokes.com/forum/

H2 cylinder needed badly
http://www.kawi2strokes.com/forum/viewtopic.php?f=26&t=11844		 Page 1 of 1
Author:  Thad Q. [ Thu Jun 16, 2016 12:10 pm ]
Post subject:  H2 cylinder needed badly
I am looking for a Right side (kicker side) type1 or type2 H2 cylinder no more than 72.00mm and with no broken fins. Thanks in advance. I have some stuff to trade let me know what you need. Or I can buy it outright. Thanks.
Thad Q.
Author:  husson73 [ Thu Jun 16, 2016 2:32 pm ]
Post subject:  Re: H2 cylinder needed badly
typ 1 or 2 mean nothing just the foundry,
square cutout or tapered cutout :?:
http://3cyl.com/mraxl/partid/cylinders/cyldif.htm
Author:  Thad Q. [ Fri Jun 17, 2016 10:04 am ]
Post subject:  Re: H2 cylinder needed badly
Early or late H2 or H2A style would work.
Author:  Thad Q. [ Sat Jun 18, 2016 2:41 pm ]
Post subject:  Re: H2 cylinder needed badly
Got one. Thank you gentlemen
Author:  R.B. [ Sat Jun 18, 2016 4:12 pm ]
Post subject:  Re: H2 cylinder needed badly
Thad Q. wrote:
Early or late H2 or H2A style would work.

.
They really wouldn't! Early H2 isn't compatible with any other H2 Cylinders :eh:
Author:  Ja-Moo [ Sat Jun 18, 2016 4:14 pm ]
Post subject:  Re: H2 cylinder needed badly
I think it would be hard pressed to tell the difference on the street.
Author:  R.B. [ Mon Jun 20, 2016 3:26 am ]
Post subject:  Re: H2 cylinder needed badly
Ja-Moo wrote:
I think it would be hard pressed to tell the difference on the street.

.
I wouldn't expect the crank to last too long running so unbalanced . .
Author:  Ja-Moo [ Mon Jun 20, 2016 7:22 am ]
Post subject:  Re: H2 cylinder needed badly
from all the castings i have seen, I wouldn't doubt there is a few hp difference between every cylinder anyway.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/