old coils let go - I was in a crunch with a pending trip - and JRD (Jeff) came to the rescue!
As always the work is stellar !!!!!!!!
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| H2b oil pump http://www.kawi2strokes.com/forum/viewtopic.php?f=26&t=11642 |
Page 1 of 2 |
| Author: | hoozier1 [ Tue Apr 19, 2016 4:37 pm ] |
| Post subject: | H2b oil pump |
anyone have a spare H2B oil pump? yep, I striped the inlet banjo bolt threads |
|
| Author: | H1FR [ Tue Apr 19, 2016 5:24 pm ] |
| Post subject: | Re: H2b oil pump |
If you don't Healy coil then of some type. I have them some nice ones. |
|
| Author: | Hawaii-Mike [ Tue Apr 19, 2016 9:55 pm ] |
| Post subject: | Re: H2b oil pump |
Hoozier1 I have a couple of spares. Will send you a pm with pics. I don't remember how I ended up with two extras, just accumulated stuff over time. Mike |
|
| Author: | H2RTuner [ Tue Apr 19, 2016 11:51 pm ] |
| Post subject: | Re: H2b oil pump |
There are people on this board that offer Heli-Coil repairs to those specific oil pump threads. |
|
| Author: | hoozier1 [ Wed Apr 20, 2016 2:10 pm ] |
| Post subject: | Re: H2b oil pump |
I thought about helicoil but didn't think they made them that small. I know a gut that is a machinist, maybe I should give him a call |
|
| Author: | JRD [ Wed Apr 20, 2016 5:20 pm ] |
| Post subject: | Re: H2b oil pump |
hoozier1 wrote: I thought about helicoil but didn't think they made them that small. I know a gut that is a machinist, maybe I should give him a call I'm a machinist with well over 35 years experience and have installed literally thousands of helicoils. I can fix that for you correctly. viewtopic.php?f=25&t=3715 Jeff |
|
| Author: | hoozier1 [ Thu Apr 21, 2016 11:10 am ] |
| Post subject: | Re: H2b oil pump |
JRD wrote: hoozier1 wrote: I thought about helicoil but didn't think they made them that small. I know a gut that is a machinist, maybe I should give him a call I'm a machinist with well over 35 years experience and have installed literally thousands of helicoils. I can fix that for you correctly. viewtopic.php?f=25&t=3715 Jeff Well, looks like your the man! I got your e-mail. looks like this the route to go. I have a helicoil question. I have stripped threads for exhaust stud. I have the helicoil kit. should I use somesort of loctite on that insert? epoxy? |
|
| Author: | Jim [ Thu Apr 21, 2016 11:27 am ] |
| Post subject: | Re: H2b oil pump |
Jeff is the guy I emailed you about Tuesday. |
|
| Author: | JRD [ Thu Apr 21, 2016 9:30 pm ] |
| Post subject: | Re: H2b oil pump |
hoozier1 wrote: JRD wrote: hoozier1 wrote: I thought about helicoil but didn't think they made them that small. I know a gut that is a machinist, maybe I should give him a call I'm a machinist with well over 35 years experience and have installed literally thousands of helicoils. I can fix that for you correctly. viewtopic.php?f=25&t=3715 Jeff Well, looks like your the man! I got your e-mail. looks like this the route to go. I have a helicoil question. I have stripped threads for exhaust stud. I have the helicoil kit. should I use somesort of loctite on that insert? epoxy? There are two types of heli coil inserts, free running and locking. Properly installed, either would be fine for the exhaust stud threads. ( the locking type are designed for thru holes ). Just make sure you drill the correct size hole and tap it square. |
|
| Author: | BarryB [ Wed May 25, 2016 9:54 am ] |
| Post subject: | Jeff to the rescue!!! Re: H2b oil pump |
old coils let go - I was in a crunch with a pending trip - and JRD (Jeff) came to the rescue! As always the work is stellar !!!!!!!!
|
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|