Kawi2strokes.com Forum
http://www.kawi2strokes.com/forum/

h2b seat and other odds and ends
http://www.kawi2strokes.com/forum/viewtopic.php?f=26&t=11146		 Page 1 of 2
Author:  usernameandpassword [ Tue Dec 01, 2015 9:24 am ]
Post subject:  h2b seat and other odds and ends
Well this winter, my plan is to complete this H2 and fully assemble it. I've kept the thing in storage, in pieces, because I just refuse to assemble most of a bike and still be short pieces for it. The time has arrived and I need to get some of the final parts. I just finished ordering the K2Tek chambers for it and need some additional parts. I need.........

1. A nice seat. RL bought a repop seat off hvc cycle.

2. A good headlight or complete headlight with trim ring. don't really need the bucket.

3. The charging idiot light for the headlight. Need any retaining hardware to mount it in the bucket as well. RL Apparently I don't need this item. thanks for the insight mraxl. :thumbup:

4. A nice foot brake, shift lever, and kickstart lever. I have the one that came with the bike but its a tad rusty, so hoping to replace with a better part than I have. RL pending sale on the foot brake and kickstarter. RL Steve covered my shifter.

If anyone has anything to offer, hit me up on this thread or by PM. :thumbup:
Author:  mraxl [ Tue Dec 01, 2015 9:32 am ]
Post subject:  Re: h2b seat and other odds and ends
The H2B headlight didn't have any idiot light.
There are nice aftermarket headlights available complete that automotive lamps can be used in.
Author:  usernameandpassword [ Tue Dec 01, 2015 9:34 am ]
Post subject:  Re: h2b seat and other odds and ends
I reckon it was just a rubber plug then. the bucket I had has the hole but nothing in it. I'll review the part diagrams. Thanks :thumbup:
Author:  Jim [ Tue Dec 01, 2015 10:30 am ]
Post subject:  Re: h2b seat and other odds and ends
You may have an earlier bucket, with the hole for the high beam indicator.
Author:  usernameandpassword [ Tue Dec 01, 2015 10:47 am ]
Post subject:  Re: h2b seat and other odds and ends
I reckon its possible. :think: I'll have to pull the bucket and look at the resource site. It came with the bike and it was already disassembled when I got it. H2s are new to me so I'm just not sure what bucket I have. It looks like the correct size unit but the guy I got it from may have thrown a bucket in from another bike. I'm sure I'll learn quite a bit messing with it over the winter. Hopefully in March, this thing will be ready for registration and title work. :thumbup:

I see HVC cycle is apparently selling a repop H2B seat. Can anyone vouch for the craftsmanship of the unit? :eh: I'm not doing a perfect restoration on this bike but do want it to turn heads like the S3 does, maybe wheel it to a few shows this year. ;)
Author:  H1FR [ Tue Dec 01, 2015 12:09 pm ]
Post subject:  Re: h2b seat and other odds and ends
Probably have every thing, no H2B seat , just a H2C seat.
Author:  R.B. [ Tue Dec 01, 2015 3:28 pm ]
Post subject:  Re: h2b seat and other odds and ends
Jim wrote:
You may have an earlier bucket, with the hole for the high beam indicator.

.
They're all the same Jim (Apart from the 1971 H2 shell in Plastic) :wave:
Author:  usernameandpassword [ Tue Dec 01, 2015 3:34 pm ]
Post subject:  Re: h2b seat and other odds and ends
Thanks for the confirmation RB. :thumbup: Some items have changed. Danny has the seat hardware, kickstarter, and foot brake and am working that sale. I did purchase the repop seat off HVC cycle. bike isn't much good if you can't sit on it and I didn't feel like going through another seat rebuild. Talking to Moo about boring my cylinders and possibly throwing some reeds on them. Getting closer. :thumbup: :mrgreen:
Author:  Jim [ Tue Dec 01, 2015 4:36 pm ]
Post subject:  Re: h2b seat and other odds and ends
Thanks, RB. I have a shell from Z1 Enterprises, from the set that fits a 7" automotive headlight, and that one doesn't have a hole. I assumed it was a reproduction of the later type. You know what they say about assuming.
Author:  Brian H. [ Mon Dec 14, 2015 12:05 am ]
Post subject:  Re: h2b seat and other odds and ends
The H2B should have a rubber plug in the hole instead of the light. The rubber plug was still available last time I checked.
Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/