Kawi2strokes.com Forum

Does anyone know what manufacturer makes a 18" x 3.00 40 aluminum rim. I checked and Excel makes a
3.50 wide rim but that's kind of wide for a H2. I had a 3.00 wide rear on my last H2 and think it was a D.I.D.
What about Sun rims?

Excel goes 2.5" then jumps to 3.5" either dimpled or not.

Sun goes 2.75" then jumps to 3.5" except for a 3"x19"

Just looked at Buchanan's website...

_________________
Don

The 3.50" is kind of wide for a H2 - but it works..........!!

_________________
"One day, your life will flash before your eyes. Make sure it's worth watching." : anon.

Morad...formerly Akront

(Central Wheel in B-ham England)

I think 3.50 x 18 rear and 2.50 x 18 front is good rim sizes for H1 and H2.

PK

Here is a link to the Morad rims: http://www.central-wheel.co.uk/rims/mor ... d_rim.html

_________________
Don

I have the 3.50 x 18 rear but with tire mounted it's real close to chain , believe I'm running a 2.15 x 18 front. I had to pull the chain guard off of bike with the wider rear

Same rim sizes I'm using on my H2C with no chain guard issues...

_________________
71 A7SS, 73 H1D, 75 H2C, 85 RG400
92 NSR250 MC21, 93 TZR250 3XV
03 ZRX 1200R

What size tire, 130?

I run a 130/80-18 on a 3.50 rim, it's close, but no clearance issues!

_________________
"One day, your life will flash before your eyes. Make sure it's worth watching." : anon.