Kawi2strokes.com Forum
http://www.kawi2strokes.com/forum/

Ball bearing Cluch Pushers H1 / H2
http://www.kawi2strokes.com/forum/viewtopic.php?f=25&t=8856		 Page 1 of 1
Author:  Ralf Gille [ Mon Jul 21, 2014 3:29 pm ]
Post subject:  Ball bearing Cluch Pushers H1 / H2
Hi All,

we have also a own ball bearing clutch pusher for H1 and H2 with SKF bearing. For board members only it costs 35 USD plus shipping outside Europe.
In Europe you have to add VAT.

All the best from Germany
Ralf
Author:  III [ Mon Jul 21, 2014 4:24 pm ]
Post subject:  Re: Ball bearing Cluch Pushers H1 / H2
Ralf, Ralf, Ralf.....What are we to do with you?
I know you have must pictures to share, right?
:)
Price sounds pretty good to me.
Author:  Ralf Gille [ Tue Jul 22, 2014 3:30 pm ]
Post subject:  Re: Ball bearing Cluch Pushers H1 / H2
Hi All,

here are two pictures of our ball bearing pusher.

All the best from Frankfurt
Ralf

Image


Image
Author:  ThreePipesSmokin [ Wed Jul 23, 2014 6:33 am ]
Post subject:  Re: Ball bearing Cluch Pushers H1 / H2
When using the ball bearing pusher in an H2, is the ball still installed between the rod and pusher or is the length of the pusher compensated for removing the ball? :think:
Author:  Jim C [ Wed Jul 23, 2014 7:31 am ]
Post subject:  Re: Ball bearing Cluch Pushers H1 / H2
The one I bought from Chris Ritchie was the same length as stock and used the ball.
I would think that you absolutely want the ball in the system.
Author:  H2RTuner [ Wed Jul 23, 2014 10:56 am ]
Post subject:  Re: Ball bearing Cluch Pushers H1 / H2
You do want to run the single ball bearing between the pusher and push rod, and add one to any setup that doesn't have one as well.
Author:  Ralf Gille [ Wed Jul 23, 2014 5:02 pm ]
Post subject:  Re: Ball bearing Cluch Pushers H1 / H2
It has the same length like the stock one,

Regards
Ralf
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/