No, but we discussed it.
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Less Expensive Alternative for Late H1 CDI http://www.kawi2strokes.com/forum/viewtopic.php?f=25&t=6618 |
Page 2 of 3 |
| Author: | Jim [ Sun Aug 11, 2013 4:54 pm ] |
| Post subject: | Re: Less Expensive Alternative for Late H1 CDI |
No, but we discussed it.
|
|
| Author: | kawi3cyl [ Sun Aug 11, 2013 7:05 pm ] |
| Post subject: | Re: Less Expensive Alternative for Late H1 CDI |
Quote: Also please note that we don't have the original style molded rubber 2-pin connector that mates with the alternator's connector. We will attach separate bullet connectors that properly mate with the alternator connector without modification. Jim, why have you decided not to utilize the oem-style connectors - cost? From Vintage Connections: 
|
|
| Author: | Jim [ Sun Aug 11, 2013 7:14 pm ] |
| Post subject: | Re: Less Expensive Alternative for Late H1 CDI |
Thanks for that Darrin, I wasn't aware they had those. I don't think they did last time I checked, but that's been a while. Edit: A search shows that VC isn't the only company offering them now. |
|
| Author: | Jim [ Sun Aug 11, 2013 7:42 pm ] |
| Post subject: | Re: Less Expensive Alternative for Late H1 CDI |
Looks like I need to update the web site to show the new connectors. 
|
|
| Author: | vtcat [ Tue Aug 13, 2013 5:10 am ] |
| Post subject: | Re: Less Expensive Alternative for Late H1 CDI |
Jim,great job as usual 
|
|
| Author: | jcsnook [ Tue Aug 13, 2013 4:04 pm ] |
| Post subject: | Re: Less Expensive Alternative for Late H1 CDI |
Awesome Jim! Nice work as usual. |
|
| Author: | scrambler73 [ Wed Aug 14, 2013 3:10 pm ] |
| Post subject: | Re: Less Expensive Alternative for Late H1 CDI |
Seriously Jim... you are a bloody Genius. And I (and I'm sure most of the rest of us commoners) am in awe of what you accomplish. The quality of your products is SUPERB. Its not that you build stuff that works.. It looks nice too.. Not some bodged together crap. I wish I lived closer (and no, Im not moving again) so I could apprentice (both welding and electrical) under you.. In exchange, I could teach you an accurate and quick way to cut and install a 4 piece crown moulding. although, come to think of it, you've probalby already built a molding cutter from scratch and a robot that can trim out a 16' x 20' room in under 30 seconds...  
|
|
| Author: | mraxl [ Wed Aug 14, 2013 3:17 pm ] |
| Post subject: | Re: Less Expensive Alternative for Late H1 CDI |
scrambler73 wrote: Seriously Jim... you are a bloody Genius. And I (and I'm sure most of the rest of us commoners) am in awe of what you accomplish. The quality of your products is SUPERB. Its not that you build stuff that works.. It looks nice too.. Not some bodged together crap. I wish I lived closer (and no, Im not moving again) so I could apprentice (both welding and electrical) under you.. In exchange, I could teach you an accurate and quick way to cut and install a 4 piece crown moulding. although, come to think of it, you've probalby already built a molding cutter from scratch and a robot that can trim out a 16' x 20' room in under 30 seconds... Agreed! |
|
| Author: | Jim [ Wed Aug 14, 2013 3:22 pm ] |
| Post subject: | Re: Less Expensive Alternative for Late H1 CDI |
Thank you Cody. I have a shaper kit for the table saw and have used it a couple times, but there's a lot I could learn from a skilled carpenter/woodworker like you. I thought you were supposed to move to NC so we could hang out on the lake though. By the way, the high here was 72°today. That's nuts for NC in mid August. It's normal for mid October. (typed in parallel with mraxl's post, thanks Dale) |
|
| Author: | Ralf Gille [ Mon Oct 21, 2013 2:08 pm ] |
| Post subject: | Re: Less Expensive Alternative for Late H1 CDI |
Today I got another package with replacement boxes from Jim. Very good job, Many thanks Ralf |
|
| Page 2 of 3 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|