Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
Bead Blasting by the Job, Parts Cleaning by the Hour http://www.kawi2strokes.com/forum/viewtopic.php?f=25&t=49 |
Page 6 of 7 |
Author: | Tim Steele [ Wed Aug 22, 2012 8:17 am ] |
Post subject: | Bead Blasting by the Job, Parts Cleaning by the Hour |
Heading out to the shop now to start on Mike Mcsween's H1R cylinders and heads They are nice now and I hope to make them better. Pics will follow. Coffee's done, gotta roll. I have about 30 acres to bushog this afternoon. Getting a late start due to being up too late after attending the local feeder calf sale, trying to relearn how to farm after 30 + years is not an easy task... |
Author: | Tim Steele [ Wed Aug 22, 2012 11:44 am ] |
Post subject: | Re: Bead Blasting by the Job, Parts Cleaning by the Hour |
Had a slght delay in starting. Had to dispose of some rat corspes, perform some baby rat executions, and some cow feed relocating. Heading out to unpack them now. |
Author: | Tim Steele [ Thu Aug 23, 2012 1:48 am ] |
Post subject: | Re: Bead Blasting by the Job, Parts Cleaning by the Hour |
Here's a before shot H1R topend, got about 1/2 done today And from the exhaust side, not sure I have them arranged correctly I assume H1R is premix as there is no provision for oiling the topend??? |
Author: | Tim Steele [ Thu Aug 23, 2012 8:08 am ] |
Post subject: | Re: Bead Blasting by the Job, Parts Cleaning by the Hour |
Hope to finish them later today I have the usual thursday business running around doing errands and grocery shopping. |
Author: | Tim Steele [ Sat Aug 25, 2012 9:54 am ] |
Post subject: | Re: Bead Blasting by the Job, Parts Cleaning by the Hour |
Been making hay for 2 days, didn't get out of the hay field until 1900 last night. Have family reunion today. I hope to get in an hour or two on them later. |
Author: | Jim C [ Sat Aug 25, 2012 10:26 am ] |
Post subject: | Re: Bead Blasting by the Job, Parts Cleaning by the Hour |
Hey Tim, No pics rat corpses / executions? We could care less about bike parts here |
Author: | Tim Steele [ Sat Aug 25, 2012 9:30 pm ] |
Post subject: | Re: Bead Blasting by the Job, Parts Cleaning by the Hour |
H1R Intake |
Author: | Tim Steele [ Sat Aug 25, 2012 9:31 pm ] |
Post subject: | Re: Bead Blasting by the Job, Parts Cleaning by the Hour |
H1R exhaust H1R Cylinder H1R cylinder and head complete detailed pics to follow; Note the texture of the castings in comparison to stock. |
Author: | Tim Steele [ Fri Aug 31, 2012 11:14 am ] |
Post subject: | Re: Bead Blasting by the Job, Parts Cleaning by the Hour |
Bump More progress... |
Author: | Tim Steele [ Thu Sep 06, 2012 9:03 am ] |
Post subject: | Re: Bead Blasting by the Job, Parts Cleaning by the Hour |
Mike McSween's H1R top end DONE Pics will follow. |
Page 6 of 7 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |