Tim, are you using glass beads?
You hear so many different blasting materials that people use????
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Bead Blasting by the Job, Parts Cleaning by the Hour http://www.kawi2strokes.com/forum/viewtopic.php?f=25&t=49 |
Page 2 of 7 |
| Author: | Mikepdutton [ Fri Jul 01, 2011 7:59 am ] |
| Post subject: | Re: Bead Blasting by the Job, Parts Cleaning by the Hour |
Tim, are you using glass beads? You hear so many different blasting materials that people use???? |
|
| Author: | Tim Steele [ Fri Jul 01, 2011 8:09 am ] |
| Post subject: | Re: Bead Blasting by the Job, Parts Cleaning by the Hour |
#80 grit glass beads. |
|
| Author: | Mikepdutton [ Fri Jul 01, 2011 9:50 am ] |
| Post subject: | Re: Bead Blasting by the Job, Parts Cleaning by the Hour |
#80 grit at 80# pressure.  Have you ever tried other types of media, like soda or walnut shells? |
|
| Author: | ThreePipesSmokin [ Fri Jul 01, 2011 12:12 pm ] |
| Post subject: | Re: Bead Blasting by the Job, Parts Cleaning by the Hour |
I tried walnut shells, quickly found out they're for getting a satin finish on something after it's already clean.  They do NOTHING on nasty cases, heads, etc...
|
|
| Author: | Tim Steele [ Fri Jul 01, 2011 12:37 pm ] |
| Post subject: | Re: Bead Blasting by the Job, Parts Cleaning by the Hour |
No just glass. I drop the pressure to 40-50 for the 2nd time around to get a satin finish. Jerry's motor is nearly done. Pics to follow. |
|
| Author: | Tim Steele [ Fri Jul 01, 2011 12:46 pm ] |
| Post subject: | Re: Bead Blasting by the Job, Parts Cleaning by the Hour |
Bottom case done Jerry Mosteller!!! 
|
|
| Author: | Mikepdutton [ Fri Jul 01, 2011 12:49 pm ] |
| Post subject: | Re: Bead Blasting by the Job, Parts Cleaning by the Hour |
Lucky Jerry! 
|
|
| Author: | Tim Steele [ Fri Jul 01, 2011 12:54 pm ] |
| Post subject: | Re: Bead Blasting by the Job, Parts Cleaning by the Hour |
If you need some done Mike, I'll treat you right. Thanks!!!
|
|
| Author: | Mikepdutton [ Fri Jul 01, 2011 2:03 pm ] |
| Post subject: | Re: Bead Blasting by the Job, Parts Cleaning by the Hour |
I have alot of work to do yet before I get to that point! Broken fins need to be welded. I have to finish up a few other projects before I can get back to the H2! 
|
|
| Author: | Tim Steele [ Fri Jul 01, 2011 9:47 pm ] |
| Post subject: | Re: Bead Blasting by the Job, Parts Cleaning by the Hour |
Motor done!!!!  A couple more:   
|
|
| Page 2 of 7 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|