Kawi2strokes.com Forum • View topic - S3 carb tuning kits soon to be in production

Board index » Selling stuff, want to buy stuff, and guys that sell and work on stuff » Vendors, Services, & Product Reviews

All times are UTC - 5 hours

S3 carb tuning kits soon to be in production

Page 1 of 1

[ 6 posts ]

Print view

Previous topic | Next topic

Author

Message

Ivan

Post subject: S3 carb tuning kits soon to be in production

Posted: Sat Aug 25, 2012 3:37 pm

Joined: Thu Jun 09, 2011 10:59 am
Posts: 81
Location: Greenville, SC

http://www.ivansperformanceproducts.com/s3.htm

The initial kits will be for the S3 & S3A... (2.0 slides) and O-2 needle jets....

Later I will get to the KH400 (2.5 slides) and O-6 needle jets.

The kit will contain my usual polished stainless multi taper needles that are in my H1 & H2 kits and also new needle jets, and the assortment of mains and pilots... not sure about the pricing yet because I don't know how many of each size that I'm going to include.

I got a nice improvement so far in response and torque when leaving a stop, midrange power as well as more top end power... very smooth engine....

Me likey !! :thumbup:

Ivan

_________________
www.ivansperformanceproducts.com

Last edited by Ivan on Mon Aug 27, 2012 6:55 pm, edited 1 time in total.

Top

scouse

Post subject: Re: S3 carb tuning kits soon to be in production

Posted: Sat Aug 25, 2012 4:30 pm

Joined: Wed Aug 10, 2011 4:10 pm
Posts: 291
Location: Knottingley, West Yorkshire UK

cool

Gary T

_________________
Wine for my men we ride at dawn

Top

kawi3cyl

Post subject: Re: S3 carb tuning kits soon to be in production

Posted: Sat Aug 25, 2012 5:01 pm

Joined: Fri Jun 10, 2011 11:04 am
Posts: 3490
Location: Capitol of Ca, USA

Ivan wrote:

The initial kits will be for the S3 & S3A... (2.0 slides)

I'm hoping this kit will work good when using S3 carbs on an S2, as many here perform this upgrade... :think:

_________________
"Only cheat the cheaters, boy - you can't cheat an honest man!" Mordecai Jones - The Flim Flam Man.

Top

Tim Steele

Post subject: Re: S3 carb tuning kits soon to be in production

Posted: Sat Aug 25, 2012 5:54 pm

Moderator

Joined: Wed Jun 08, 2011 5:34 pm
Posts: 2793
Location: Front Royal, VA

Let me know how they work on a S2 motor with S3 carbs...I may have to get a set too.

_________________
I Love the Smell of Blue Marble in the Morning!!!
Tim Steele in Front Royal, VA
Home of the Phoenix Project
Stay in it when it comes on the pipe, no need to be scared...

Top

ThreePipesSmokin

Post subject: Re: S3 carb tuning kits soon to be in production

Posted: Mon Aug 27, 2012 5:31 am

Joined: Wed Jun 08, 2011 10:28 pm
Posts: 1559
Location: Tampa Bay Florida

According to the resource site, S2 brass is the same as S3 with the exception of the pilot jet. Should work fine on my S1 with S2 carbs! :thumbup:

_________________
We don't need no stinkin' Cams!

Top

Ivan

Post subject: Re: S3 carb tuning kits soon to be in production

Posted: Thu Nov 22, 2012 9:06 am

Joined: Thu Jun 09, 2011 10:59 am
Posts: 81
Location: Greenville, SC

S3 & S3A kits are ready finally....
www.ivansperformanceproducts.com/s3.htm

They are the same price as my H1 500 kit and contain all the same combination of components specifically spec'ed out for the S3.
More power everywhere, much better fuel mileage, more torque leaving a traffic light.

Main jets (6 sizes)
Pilot jets (2 sizes)
Needles (my own design, mirror finished, 5 angle stainless steel)
Needle jets (Exact duplicates of the originals)
Stainless allen bowl screws
An easy setup sheet and installation tips

Holiday sale prices will be honored for this new product from me.

Happy Holidays to everyone !! :thumbup:

Ivan

_________________
www.ivansperformanceproducts.com

Top

Page 1 of 1

[ 6 posts ]

Board index » Selling stuff, want to buy stuff, and guys that sell and work on stuff » Vendors, Services, & Product Reviews

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: