Kawi2strokes.com Forum
http://www.kawi2strokes.com/forum/

Pipe Kits
http://www.kawi2strokes.com/forum/viewtopic.php?f=25&t=397		 Page 6 of 8
Author:  Walms [ Sat Jan 16, 2016 9:05 pm ]
Post subject:  Re: Pipe Kits
Quite honestly, there are 12 segments to play with for doing a custom layout, others have done it in the past. It just takes lots of patience,duct tape and or tacking.
Author:  Ja-Moo [ Sun Jan 17, 2016 2:49 am ]
Post subject:  Re: Pipe Kits
Neville Lush wrote:
Same sort of deal with your reed conversions John, do you have stuff to show the gains one gets?


I have posted findings all through the years, Nev. Some dyno graphs, my own testing, throttle response comparatives, acceleration through the gears at varied rpms, race testing, videos, customer reviews, some drag racing, and letting people ride my bike.

The thing about reed conversions, is it is very easy to tell the difference, even with a crappy butt dyno... ;) . Almost in every instance rid-ability is impressively improved. :mrgreen:
Author:  Neville Lush [ Sun Jan 17, 2016 6:28 pm ]
Post subject:  Re: Pipe Kits
With all due respect, one cannot accurately compare any of those dyno graphs as they all have mixtures all over the place. Each pipe needs to be tuned to at least run properly at WOT before an accurate comparison can be made. It is easy to see the massive flat spot in the blue 102hp graph is caused by the big lean area in the fuel curve, Melt down time....... The light green graph is pig rich. This is a dyno test NOT tuning. The guy can only do what you tell him or pay for.
Author:  Walms [ Sun Jan 17, 2016 10:02 pm ]
Post subject:  Re: Pipe Kits
Those graphs were not results of any dyno tuning, this is just a bunch of guys at RB's throwing their bikes on a free dyno as they were currently jetted.
Author:  Neville Lush [ Mon Jan 18, 2016 1:26 am ]
Post subject:  Re: Pipe Kits
That explains a bit, for sure. !!
Author:  72zx7r [ Thu Mar 31, 2016 10:36 pm ]
Post subject:  Re: Pipe Kits
WTB a set for a 750 project in side the frame. I know I have to mod to kit to fit { is there a long wait? }
Author:  Walms [ Fri Apr 01, 2016 5:52 am ]
Post subject:  Re: Pipe Kits
In a word, yes...
I am compiling a list for the next batch of orders now. Send me an email at walms@hotmail.com and we can discuss further. Your project looks pretty cool btw!!!
Andrew
Author:  RODH2 [ Fri Apr 01, 2016 6:20 am ]
Post subject:  Re: Pipe Kits
Nice project....... 80 HP in a modern set-up! Signed......... ZX10r owner with 180 hp at 12,000rpm
Author:  72zx7r [ Fri Apr 08, 2016 11:15 am ]
Post subject:  Re: Pipe Kits
Hi Walms
did you get my email I sent you to your hot mail about a week ago I have not heard back .!!!!!
Author:  Walms [ Fri Apr 08, 2016 2:32 pm ]
Post subject:  Re: Pipe Kits
Sorry, I'll check my junk folder
Page 6 of 8 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/