Kawi2strokes.com Forum
http://www.kawi2strokes.com/forum/

Clutch release / clutch actuators new product
http://www.kawi2strokes.com/forum/viewtopic.php?f=25&t=2744		 Page 1 of 7
Author:  Ralf Gille [ Fri Mar 16, 2012 3:33 am ]
Post subject:  Clutch release / clutch actuators new product
Hello to All,

now you can get new clutch releases made in Germany. They are made of high quality material. If you compare it for example with the systech actuators, they have some advantages. At first they don't like to clamp or blocke (Sorry for my bad english and explanation). Second the opening way is a little bit longer so the clutches opened
complete, because that was a problem sometimes with the systechs on H1. Third advantage is that they are a little bit smaller.
The actuators come with a special tube of grease and with the two bolts, that's all.
They cost 155,- USD plus shipping. I think some guys saw or bought them on ebay. They are machined by a good friend of mine.

If you need one you can send me a mail to rgjs@arcor.de
Payment via paypal.

All the best from Germany
Ralf

Image



Image
Author:  Jim [ Fri Mar 16, 2012 9:05 am ]
Post subject:  Re: Clutch release / clutch actuators new product
With the machining that goes into that assembly, and the low volume of production, that sound like a good price.
Author:  BarryB [ Fri Mar 16, 2012 9:19 am ]
Post subject:  Re: Clutch release / clutch actuators new product
Thanks for sharing Ralf, if there's a link to purchase etc let us know.
bb
Author:  Ralf Gille [ Fri Mar 16, 2012 9:42 am ]
Post subject:  Re: Clutch release / clutch actuators new product
Hi Barry and all the others,

there is no link. If you need one you can send me a mail to rgjs@arcor.de
Payment via paypal.
I'm doing the distribution for them over my shop.

Best Regards
Ralf
Author:  BarryB [ Fri Mar 16, 2012 10:20 am ]
Post subject:  Re: Clutch release / clutch actuators new product
That's cool - I'll make a note. Last year I found a later ball bearing to replace my broken plastic and was really struggling trying to find a sytec when the BBearing one came my way. But I'm sure a lot of guys are looking to replace theirs.

We see all these posts about how hard a clutch can pull - and I bet a fair amount of those issues are workout actuators or its contributing to hard pulls.
Author:  garand1944 [ Fri Mar 16, 2012 10:21 am ]
Post subject:  Re: Clutch release / clutch actuators new product
Rainer makes some sweet parts and is a super nice guy :clap:
Author:  400500750 [ Fri Mar 16, 2012 1:12 pm ]
Post subject:  Re: Clutch release / clutch actuators new product
One more very important "wear-part" reproduced (that is 'Better' produced!) for our triples! Yippee! :clap:
Author:  AER005 [ Fri Mar 16, 2012 3:53 pm ]
Post subject:  Re: Clutch release / clutch actuators new product
thanks for making them I will put them on my list :thumbup:
Author:  Ralf Gille [ Mon Apr 02, 2012 4:18 pm ]
Post subject:  Re: Clutch release / clutch actuators new product
Hi,

here is again a picture of our new clutch releases which are made by my friend Rainer. Now there are copies from Italy on ebay. But please don't compare them with our actuators. I don't know what material they take and also the part where the cable will be fit in is not a cnc machined part it's only made of sheet metal like the originals. Our actuator comes with a small tube of grease and the two bolts.

Best Regards from Germany
Ralf
Image
Author:  III [ Mon Apr 02, 2012 5:01 pm ]
Post subject:  Re: Clutch release / clutch actuators new product
Think I will order one as soon as I sell my new Sytech at ebay Ralf. :mrgreen:
Those look to be the bomb.
Your friend does excellent work.
Whats the shipping to the US???
Page 1 of 7 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/