| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Crankshaft Rebuilding Service http://www.kawi2strokes.com/forum/viewtopic.php?f=25&t=2406 |
Page 2 of 9 |
| Author: | hooktool [ Tue Mar 06, 2012 7:32 pm ] |
| Post subject: | Re: Crankshaft Rebuilding Service |
Charlie did one for me, and I haven't used it yet, but it sure is pretty.  I had it back in my shop in a week from the time it left.I'm collecting cranks-Porschedave just did one for me, and I'm doing one more if I can get the cylinders off the one I'm working on now. John |
|
| Author: | triple cranks [ Thu Mar 08, 2012 2:46 pm ] |
| Post subject: | Re: Crankshaft Rebuilding Service |
BarryB wrote: I've whacked my new crank pretty good - seems to be taking my beatings well  Thanks again Charlie!My pleasure! |
|
| Author: | triple cranks [ Wed Apr 25, 2012 9:48 pm ] |
| Post subject: | Re: Crankshaft Rebuilding Service |
Before..... Attachment: old h1 med.jpg After with ultrasonic cleaning, new weight matched Vesrah rods (rod, big end bearing, small end bearing, crank pin and thrust washers), Koyo bearings and "Made in the USA" CNC machined lab seals! This one trued to less than .0006". Usually they are true to within .001". This one was exceptional. |
|
| Author: | triple cranks [ Wed Apr 25, 2012 9:55 pm ] |
| Post subject: | Re: Crankshaft Rebuilding Service |
$775.00 was the total cost if you were wondering.... If your rods are good you are looking at $495.00 with Koyo bearings and free shipping. 
|
|
| Author: | triple cranks [ Sun Sep 02, 2012 12:45 pm ] |
| Post subject: | Re: Crankshaft Rebuilding Service |
Rarely does a shaft completely zero out. This one did. Usually they are under .001", but this was exceptional! I have a short clip but I don't think this site will accept the file. This particular rebuild cost the customer $380.00. That included the shipping. |
|
| Author: | BarryB [ Sun Sep 02, 2012 1:51 pm ] |
| Post subject: | Re: Crankshaft Rebuilding Service |
Charlie - you are AWESOME! Put the video on YouTube or send it to me or Moo - we'll do it! |
|
| Author: | Steve [ Sun Sep 02, 2012 2:16 pm ] |
| Post subject: | Re: Crankshaft Rebuilding Service |
triple cranks wrote: $775.00 was the total cost if you were wondering.... If your rods are good and you opt for standard grade bearings you are looking at $350.00. Great info, thank you! |
|
| Author: | triple cranks [ Sun Sep 02, 2012 10:34 pm ] |
| Post subject: | Re: Crankshaft Rebuilding Service |
Here are two links to youtube. They are only seconds long but show the needed information. Short and to the point. This is my first youtube post, so forgive my novice approach. http://www.youtube.com/watch?v=1SsfcWnZvCk http://www.youtube.com/watch?v=eGYH-2PWqiU |
|
| Author: | triple cranks [ Tue Sep 11, 2012 10:32 pm ] |
| Post subject: | Re: Crankshaft Rebuilding Service |
This is my latest rebuild. It trued from .0000" to .0002". Here are the links to the video. Sorry for the poor quality of the video. http://www.youtube.com/watch?v=YCdIR94gLus http://www.youtube.com/watch?v=Mto-3Axj4I8 http://www.youtube.com/watch?v=wgDt_SQvXTE http://www.youtube.com/watch?v=K587dzEbe9E |
|
| Author: | Dewman418 [ Tue Sep 11, 2012 11:18 pm ] |
| Post subject: | Re: Crankshaft Rebuilding Service |
Good job Charlie 
|
|
| Page 2 of 9 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|