| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Lab Seals for H1 http://www.kawi2strokes.com/forum/viewtopic.php?f=25&t=2309 |
Page 1 of 1 |
| Author: | Ralf Gille [ Thu Feb 02, 2012 4:15 pm ] |
| Post subject: | Lab Seals for H1 |
Hi all triple lovers, we are doing now new crank lab seals for H1. It has two ring grooves on the outside with o-ring to prevent spinning. It's complete made in Germany no chineese stuff. Small ring has 7 and the big one has 8 inner grooves. It's all made of high quality material. One pair is 115 USD plus shipping. Best Regards from Germany Ralf  
|
|
| Author: | Ja-Moo [ Thu Feb 02, 2012 4:28 pm ] |
| Post subject: | Re: Lab Seals for H1 |
very nice Ralf!  
|
|
| Author: | H2RTuner [ Thu Feb 02, 2012 9:17 pm ] |
| Post subject: | Re: Lab Seals for H1 |
In my opinion, that type seal should be used on all A, S and H series crankshafts when rebuilt. Nice work. |
|
| Author: | Jim C [ Thu Feb 02, 2012 9:23 pm ] |
| Post subject: | Re: Lab Seals for H1 |
Available for an H2? |
|
| Author: | Ralf Gille [ Fri Feb 03, 2012 2:54 am ] |
| Post subject: | Re: Lab Seals for H1 |
Hi Folks, thanks for the nice words. Next step is H2 but it takes some days. S series is more difficult because of the width, they are very small, but we think about it. Best Regards from Frankfurt Ralf |
|
| Author: | garand1944 [ Wed Mar 28, 2012 2:59 pm ] |
| Post subject: | Re: Lab Seals for H1 |
Received my seals from ralf yesterday.....beautiful. Thanks Ralf ! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|