Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
Custom Expansion Chambers http://www.kawi2strokes.com/forum/viewtopic.php?f=25&t=12143 |
Page 1 of 1 |
Author: | richfan [ Wed Sep 28, 2016 7:19 pm ] |
Post subject: | Custom Expansion Chambers |
It seems like it's becoming a lost art. Is there anyone that still builds expansion chambers in the Southern California area? I've got a custom set that I need some mods on after a swingarm upgrade. I've looked and a dozen lists on line but all of those businesses seem to be out of business! The only place I could find was Wicked ATV in Garden Grove. This photo is before the swing arm and master cylinder was added and brake pedal mod..... That middle pipe is soooooo low, I know I'm going to run over an ant and dent it. Attachment: exh.jpg
|
Author: | Jim [ Wed Sep 28, 2016 7:45 pm ] |
Post subject: | Re: Custom Expansion Chambers |
You might look up Jeff Henise, of Highwayman Pipes. |
Author: | richfan [ Thu Sep 29, 2016 11:23 am ] |
Post subject: | Re: Custom Expansion Chambers |
Jim wrote: You might look up Jeff Henise, of Highwayman Pipes. JIM! You won't believe what happened. I had seen Highwayman Pipes a couple of months ago on the internet and not given it much thought because he lives about 600 miles away. I was looking for a man named Dave Miller who is well known in my area, but the contact info I received was no good and his website was outdated. Jeff Heniese called his friend Roland Wheeler who knows Dave Miller and...... SUCCESS! What a great community we have! I told Jeff you sent me! Thanks again Jim! (BTW I received the new Lakeland CDI. Thanks for that as well!) Rich |
Author: | Jim [ Thu Sep 29, 2016 12:33 pm ] |
Post subject: | Re: Custom Expansion Chambers |
Rich, that's great, I'm glad it worked out. I'll continue to use Jeff as the West Coast triples expansion chamber liaison. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |