| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| New product for H1 to H1C http://www.kawi2strokes.com/forum/viewtopic.php?f=25&t=10354 |
Page 1 of 2 |
| Author: | Ralf Gille [ Tue Apr 21, 2015 3:13 pm ] |
| Post subject: | New product for H1 to H1C |
Hi, we have a new product for the old Mach-III forks I don't know the right English translation for this. But it comes on the bottem of the fork legs and it's many times broken. We take 75 Euro shipping included overseas. All the best from Germany Ralf http://www.gille-restauration.de  
|
|
| Author: | mraxl [ Tue Apr 21, 2015 3:32 pm ] |
| Post subject: | Re: New product for H1 to H1C |
Ralf, I can't find anything like you describe on your site??? |
|
| Author: | Ralf Gille [ Tue Apr 21, 2015 4:49 pm ] |
| Post subject: | Re: New product for H1 to H1C |
Yes you are right, it's not on our side. The problem is that my Girlfriend was long time in hospital for weeks and normally she wanted to update our page at the beginning of this year. But now she is still ill since January, so our side have also to wait of better times. I let the forum members know when we have the English language page with all updates. I can't make the update. I'm not a computer freak. I think the name of our new product must be fork tube guide. Hope that is correct, All the best from Germany Ralf www.gille-restauration.de |
|
| Author: | mraxl [ Tue Apr 21, 2015 5:01 pm ] |
| Post subject: | Re: New product for H1 to H1C |
44015-011 
|
|
| Author: | H2RTuner [ Tue Apr 21, 2015 7:41 pm ] |
| Post subject: | Re: New product for H1 to H1C |
From appearances, and I could be wrong, Ralf's appears to be a lower fork tube bushing, fits the bottom of the inner fork tube, and slides up and down with the inner tube, through the outer tube. This from not being able to see the lip on the part that holds the bushing in the upper position. Mraxl's is the upper fork bushing, just under the fork nut/seal holder, inner tube slides through it. |
|
| Author: | husson73 [ Wed Apr 22, 2015 2:08 am ] |
| Post subject: | Re: New product for H1 to H1C |
Too bad reading Jeannette is ill Ralf, a good recovery for her. |
|
| Author: | Ralf Gille [ Wed Apr 22, 2015 2:37 am ] |
| Post subject: | Re: New product for H1 to H1C |
Thanks JP hope she could ride again on the German Rally. We go to the Sweden / Norwegian Rally this year with many German guys, but I think it's too early for her, because she can't move her leg in the correct way. H2R Turner is right it's the part which is mounted on the inner tube and goes up and down with it. I can make better pictures today, Best Regards Ralf |
|
| Author: | H2RTuner [ Wed Apr 22, 2015 11:00 am ] |
| Post subject: | Re: New product for H1 to H1C |
Ralf, all our hopes and wishes are for a complete and total recovery, as soon as possible for your lady, sir. |
|
| Author: | Leon [ Fri Apr 24, 2015 6:52 am ] |
| Post subject: | Re: New product for H1 to H1C |
Ralf, all the best wishes to Jeanette and you. Hope she recovers soon |
|
| Author: | Ja-Moo [ Fri Apr 24, 2015 10:43 am ] |
| Post subject: | Re: New product for H1 to H1C |
So sorry to hear about Jeanette not being well. Hoping for a fast and full recovery! |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|