Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
First fire after rebuilding 40 lectrons http://www.kawi2strokes.com/forum/viewtopic.php?f=22&t=9652 |
Page 1 of 2 |
Author: | xtreemnoise [ Sat Dec 20, 2014 1:41 pm ] |
Post subject: | First fire after rebuilding 40 lectrons |
http://youtu.be/hvP6omD5Ab0 First fire after rebuilding 40 lectrons w/ power rings. Bike had not been run in awhile & almost sold due to being semi employed since 08. Anyway full time job again and back to working on the toys (Stage 3 Gast motor) |
Author: | Jim [ Sat Dec 20, 2014 2:12 pm ] |
Post subject: | Re: First fire after rebuilding 40 lectrons |
I take it you plan to ride it mostly on the drag strip. Nice to meet you, welcome to the board. |
Author: | xtreemnoise [ Sat Dec 20, 2014 3:00 pm ] |
Post subject: | Re: First fire after rebuilding 40 lectrons |
Hi Jim, This is Mark Gastmeyer recently purchased a few things from you. Originally when I purchased this bike had planned to do some vintage drag racing. That was 10 years ago and now being a bit older that notion has gone away. Now I just ride it around to various car & bike shows etc. I've actually been on several of the forums over the years after being laid off in 08 stopped all hobbies and concentrated on survival. Very happy to be tinkering again |
Author: | Jim [ Sat Dec 20, 2014 4:06 pm ] |
Post subject: | Re: First fire after rebuilding 40 lectrons |
Ah yes, Hi Mark, it's good to see the H2C running. Maybe someday add some reeds and you'll have a heck of a street H2. Not that it isn't now, but I bet the bottom end torque is a bit less than stock. |
Author: | Jim C [ Sat Dec 20, 2014 6:36 pm ] |
Post subject: | Re: First fire after rebuilding 40 lectrons |
xtreemnoise wrote: I've actually been on several of the forums over the years after being laid off in 08 stopped all hobbies and concentrated on survival. Very happy to be tinkering again Glad things are brighter and that you are able to enjoy your bike again. Can you get away with open chambers on the street in your area? |
Author: | xtreemnoise [ Sun Dec 21, 2014 1:11 pm ] |
Post subject: | Re: First fire after rebuilding 40 lectrons |
Not sure about legality of straight stingers in my area? Have actually ridden right next to Cop car & He just drove on? Another time had started it up in driveway & it was smoking a bit just as a cop drove by. He gave me a nasty stare & pointed being a young guy I assumed he didn't know it was a 2 stroke like many. Normally Of course I avoid really getting on it because it roars like a wild beast |
Author: | BBP [ Thu Dec 25, 2014 11:28 pm ] |
Post subject: | Re: First fire after rebuilding 40 lectrons |
I would love a neighbor with a bike like that..........only a few can appreciate the sound of a two stroke...........my neighbor just got the kid's a 4 wheeler two stroke for X-Mass, they have been blasting it around all day........and yes, I gave them the Thumbs UP .........maybe he won't grow up to be some video game panzy THX Phil |
Author: | Mr_Dunev [ Sun Feb 01, 2015 11:36 pm ] |
Post subject: | Re: First fire after rebuilding 40 lectrons |
Awesome, I bet your neighbors love you!! |
Author: | jyrgNorway [ Thu Feb 26, 2015 4:37 pm ] |
Post subject: | Re: First fire after rebuilding 40 lectrons |
Hi. Looking awsome. Do you plan putting the beast on a dyno? Should be really interestingt, as I NEVER have seen a Gast dynosheet Jorgen |
Author: | xtreemnoise [ Mon Mar 02, 2015 3:30 pm ] |
Post subject: | Re: First fire after rebuilding 40 lectrons |
Actually going to be tearing the bike down to weld a crack in the frame discovered while fitting the carbs back on . Looks like its in a place mentioned in the past as a common weak area. The left front downtube just above engine mount lug cracked clean through ! So looks like I'll be freshening up the bike will add bracing to avoid furthur cracks. Thinking that either previous owner or myself may have cracked it doing a wheelie? |
Page 1 of 2 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |