I rode 120 miles yesterday, but watching that makes me want to go out now.
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| TM32 conversion 75 RD350B http://www.kawi2strokes.com/forum/viewtopic.php?f=22&t=14405 |
Page 2 of 2 |
| Author: | Tim Steele [ Sat Mar 27, 2021 7:56 am ] |
| Post subject: | Re: TM32 conversion 75 RD350B |
https://youtu.be/BOS18OmiJJU |
|
| Author: | Jim [ Sat Mar 27, 2021 8:04 am ] |
| Post subject: | Re: TM32 conversion 75 RD350B |
I rode 120 miles yesterday, but watching that makes me want to go out now.
|
|
| Author: | Tim Steele [ Sun Mar 28, 2021 1:58 pm ] |
| Post subject: | Re: TM32 conversion 75 RD350B |
   Put 250 main jets in to see if it would pull them. Ran perfect pulled harder. Then I pulled up to an intersection and turned on the turn signals and the motor missed. I turned them off and the dropped cylinder came back. I barely made it home. Battery voltage was 8.5 DC. After consulting with M in SC for guidance I pulled the ignition cover and noted the upper alternator brush arcing while revving the motor. I went to one of my parts stators and liberated a set of alternator brushes. 13.65 Volts DC revving motor with a fully charged battery dropping to 12.5 and 14.5 to 15.5 DC Volts with headlight on high beam, brake mashed and turn signals on. 240 main jet plug chop 
|
|
| Page 2 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|