May remove the crash bars.
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| My H1A and H1B http://www.kawi2strokes.com/forum/viewtopic.php?f=22&t=11424 |
Page 1 of 4 |
| Author: | Pecka [ Mon Feb 22, 2016 4:31 pm ] |
| Post subject: | My H1A and H1B |
May remove the crash bars. |
|
| Author: | Evans Ward [ Mon Feb 22, 2016 5:07 pm ] |
| Post subject: | Re: My H1A and H1B |
Very nice! You have two pretty rare triple models there. |
|
| Author: | RODH2 [ Mon Feb 22, 2016 6:20 pm ] |
| Post subject: | Re: My H1A and H1B |
Remove the Crash bars.............!! ( Hey, nice bikes!) 
|
|
| Author: | Stev-o [ Tue Feb 23, 2016 12:39 am ] |
| Post subject: | Re: My H1A and H1B |
RODH2 wrote: Remove the Crash bars.............!! ( Hey, nice bikes!) +1! |
|
| Author: | Pecka [ Thu Apr 14, 2016 1:26 pm ] |
| Post subject: | Re: My H1A and H1B |
Haven't got the crash bars off yet but drove the blue one a bit over 100 miles today. Third time I ride this year. It's a great bike, overall I'm very satisfied with it. Had some concerns about the clutch as it seemed sticky, but it now seems to have loosened itself up as I was able to adjust for more proper wire slack at the handlebar leveler. I think the bike handles good too, far better than it's reputation suggests. |
|
| Author: | husson73 [ Fri Apr 15, 2016 2:27 am ] |
| Post subject: | Re: My H1A and H1B |
the reputation was made by guys who never rode one 
|
|
| Author: | RODH2 [ Fri Apr 15, 2016 4:18 am ] |
| Post subject: | Re: My H1A and H1B |
husson73 wrote: the reputation was made by guys who never rode one I can add nothing to this.......... |
|
| Author: | Pecka [ Tue Apr 26, 2016 11:53 am ] |
| Post subject: | Re: My H1A and H1B |
Too bad these two bikes also turned out to be bitter disappointments. 
|
|
| Author: | Pecka [ Mon Apr 17, 2017 7:33 am ] |
| Post subject: | Re: My H1A and H1B |
I did remove the fugly crash bar from the blue bike. Still need to fix the engine though. Would love to learn to rebuild an complete engine myself. That would save me a total of 1600+ km transporting it in my car to the rebuilder and back. Not sure what to do yet. 
|
|
| Author: | RODH2 [ Mon Apr 17, 2017 7:48 am ] |
| Post subject: | Re: My H1A and H1B |
With the advice on this forum, and mraxl's site, http://kawtriple.com/mraxl/ you can easily build an engine yourself. They are relatively simple and straight forward engines, and a little care and patience will get you a long way. All the information is on the Triples resource site, and plenty of free advice here! |
|
| Page 1 of 4 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|