Doesn't look too bad, if the blade speed will go low enough for metal. I have a recent model Kawasaki rechargeable circular saw. I never though much about it, but I guess I should have posted a photo in the "latest purchase" thread.
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| COOL TOOL Green too http://www.kawi2strokes.com/forum/viewtopic.php?f=21&t=9491 |
Page 1 of 2 |
| Author: | III [ Thu Nov 20, 2014 4:10 am ] |
| Post subject: | COOL TOOL Green too |
$200.00 fairly local to me on Craigslist. Attachment: 00x0x_4URgD5LDOQG_600x450.jpg Attachment: 00Q0Q_joxp40FVDVS_600x450.jpg
|
|
| Author: | Jim [ Thu Nov 20, 2014 8:30 am ] |
| Post subject: | Re: COOL TOOL Green too |
Doesn't look too bad, if the blade speed will go low enough for metal. I have a recent model Kawasaki rechargeable circular saw. I never though much about it, but I guess I should have posted a photo in the "latest purchase" thread.
|
|
| Author: | two-stroke-brit [ Thu Nov 20, 2014 12:48 pm ] |
| Post subject: | Re: COOL TOOL Green too |
difficult to tell how big it is , but for $200 looks like a bargain  .
|
|
| Author: | III [ Thu Nov 20, 2014 2:47 pm ] |
| Post subject: | Re: COOL TOOL Green too |
Probably not too big. It says 9" on the side. |
|
| Author: | two-stroke-brit [ Thu Nov 20, 2014 7:59 pm ] |
| Post subject: | Re: COOL TOOL Green too |
your 9" might be bigger than mine. ew err that's risky. i don't know how the measurement would apply. maybe its the max depth of cut which would be a lot . mark |
|
| Author: | Jim [ Thu Nov 20, 2014 8:06 pm ] |
| Post subject: | Re: COOL TOOL Green too |
The specifications are on page 27 of the manual, which you can read here: http://www.alltradetools.com/pdfs/new/a ... 54_eng.pdf It's small and has one blade speed, suitable for wood and maybe aluminum. |
|
| Author: | III [ Thu Nov 20, 2014 10:02 pm ] |
| Post subject: | Re: COOL TOOL Green too |
two-stroke-brit wrote: your 9" might be bigger than mine. yeah, Im not gonna go there Mark..... I know what I used to tell the wife was 8" was a bit of fabrication.... I dont really think that little saw is worth 200 bucks to be honest with you. Maybe 100 as it is very limited as Jim points out. Just thought it was cool and green is all. I do have a green case of Kawasaki drill bits. Thanks to Darrin. 
|
|
| Author: | III [ Thu Nov 20, 2014 10:16 pm ] |
| Post subject: | Re: COOL TOOL Green too |
http://www.usedfarmequipment.net/store/11533.html like I said 200 is too much |
|
| Author: | Jim C [ Sat Nov 22, 2014 9:41 am ] |
| Post subject: | Re: COOL TOOL Green too |
All the little inexpensive bandsaws with the exception of Harbor Freight are designed for wood from what I have seen. Not only blade speed but overall construction durability. I bought a HF vertical / horizontal saw years ago for about $175 that has been really good. They are $250 now and worth considering. http://www.harborfreight.com/horizontal ... 93762.html |
|
| Author: | JRD [ Sat Nov 22, 2014 6:42 pm ] |
| Post subject: | Re: COOL TOOL Green too |
Here's the 14" abrasive cutoff saw I have  I think I paid about $130 shipped for it. |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|