Kawi2strokes.com Forum
http://www.kawi2strokes.com/forum/

There are tank slappers and weaves.......
http://www.kawi2strokes.com/forum/viewtopic.php?f=21&t=6229
Page 1 of 1

Author:  Ja-Moo [ Fri May 24, 2013 4:40 pm ]
Post subject:  There are tank slappers and weaves.......

This is NOT a weave........ :o

http://www.break.com/index/what-it-look ... ph-2446622

Author:  BarryB [ Fri May 24, 2013 5:36 pm ]
Post subject:  Re: There are tank slappers and weaves.......

This is the scariest thing to ever happen to me - and I lost (on the H2)... :thumbdown:

Author:  R.B. [ Sat May 25, 2013 4:35 pm ]
Post subject:  Re: There are tank slappers and weaves.......

Had it just as bad - TWICE! Once on the h2 at the drag strip on landing from a wheelie at 80MPH and buckling the wheel :crazy: And again a few Months ago when I took my hands off the bars of an RG500 at 80 MPH :thumbdown: . . . I survived Both occasions 8-)

Author:  ThreePipesSmokin [ Sat May 25, 2013 6:02 pm ]
Post subject:  Re: There are tank slappers and weaves.......

Rick, 80mph seems to be your barrier since if you hit 88mph you will commence time travel! :o :lol:

Author:  BarryB [ Sat May 25, 2013 6:48 pm ]
Post subject:  Re: There are tank slappers and weaves.......

ThreePipesSmokin wrote:
Rick, 80mph seems to be your barrier since if you hit 88mph you will commence time travel! :o :lol:


Only if the flux capacitor is charged to 1.2 gigawatts :o Unless you've upgraded to a Mr. Fusion - but it won't work if the horn is upside down.

Author:  two-stroke-brit [ Mon May 27, 2013 2:05 pm ]
Post subject:  Re: There are tank slappers and weaves.......

BarryB wrote:
ThreePipesSmokin wrote:
Rick, 80mph seems to be your barrier since if you hit 88mph you will commence time travel! :o :lol:


Only if the flux capacitor is charged to 1.2 gigawatts :o Unless you've upgraded to a Mr. Fusion - but it won't work if the horn is upside down.


:lol: :lol: :lol:

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/