Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Wed May 07, 2025 6:35 am

All times are UTC - 5 hours




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Shell Rotella T
PostPosted: Wed Nov 21, 2012 9:43 am 
User avatar

Joined: Thu Jun 09, 2011 3:35 pm
Posts: 562
Location: Cedar Rapids, Iowa
I, like so many of you, have 4 strokes along with my 2 strokes and oil for the 4 stroke bikes can get very expensive, so I started using Shell Rotella T, which is approved for motorcycles with wet clutches.

I don't ride some of my 4 strokes very much so instead of the full synthetic that I normally use, this time I bought semi-synthetic at Wally-World, 1 gallon for a little less than $13.00.

Just an FYI.

_________________
Using a poorly conceived idea along with bad mechanical practice is not an upgrade but rather a recipe for disaster.


Top
 Profile  
 
 Post subject: Re: Shell Rotella T
PostPosted: Wed Nov 21, 2012 1:20 pm 
User avatar

Joined: Sat Mar 10, 2012 8:12 am
Posts: 710
battleax wrote:
I, like so many of you, have 4 strokes along with my 2 strokes and oil for the 4 stroke bikes can get very expensive, so I started using Shell Rotella T, which is approved for motorcycles with wet clutches.

I don't ride some of my 4 strokes very much so instead of the full synthetic that I normally use, this time I bought semi-synthetic at Wally-World, 1 gallon for a little less than $13.00.

Just an FYI.


That's what I've been using and it's great oil

_________________
steve


Top
 Profile  
 
 Post subject: Re: Shell Rotella T
PostPosted: Wed Nov 21, 2012 3:56 pm 
User avatar

Joined: Sat Jun 11, 2011 7:41 pm
Posts: 677
Location: Indianapolis, In
That is what I use in my 4 strokes. It is a good semi-synth and does not have a bad affect on clutch operation. I have used it on 4 bikes without any problems.

_________________
Rotortech
Indianapolis
1974 S3


Last edited by rotortech on Thu Nov 29, 2012 7:33 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Shell Rotella T
PostPosted: Wed Nov 28, 2012 8:15 pm 
User avatar

Joined: Thu Jun 09, 2011 6:26 pm
Posts: 901
Location: Zionsville,PA
:lol: That's the oil I use in my 1960's vintage cub cadets.( straight 30W ) It's good air cooled engine oil :thumbup:

Jeff


Top
 Profile  
 
 Post subject: Re: Shell Rotella T
PostPosted: Wed Nov 28, 2012 8:39 pm 
Moderator
User avatar

Joined: Thu Jun 09, 2011 6:16 am
Posts: 2147
Location: North Alabama
A lot of BMW riders use it.

_________________
Busy doing more riding than wrenching.......


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group