Amazon reviews are pretty decent........
http://www.amazon.com/Red-Kote-Quart-Se ... ewpoints=1
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| any one used this tank sealant ?? http://www.kawi2strokes.com/forum/viewtopic.php?f=2&t=8101 |
Page 1 of 4 |
| Author: | two-stroke-brit [ Sat Mar 29, 2014 11:43 am ] |
| Post subject: | any one used this tank sealant ?? |
a colleague has recommended this product but i haven't heard of it before. http://www.ebay.com/itm/RED-KOTE-GAS-FU ... cc&vxp=mtr |
|
| Author: | III [ Sat Mar 29, 2014 11:53 am ] |
| Post subject: | Re: any one used this tank sealant ?? |
Amazon reviews are pretty decent........ http://www.amazon.com/Red-Kote-Quart-Se ... ewpoints=1
|
|
| Author: | suthernS2 [ Sat Mar 29, 2014 12:21 pm ] |
| Post subject: | Re: any one used this tank sealant ?? |
I know an old ducati dealer that swears by that stuff. |
|
| Author: | smoff83 [ Sat Mar 29, 2014 2:03 pm ] |
| Post subject: | Re: any one used this tank sealant ?? |
friend of mine knows a radiator shop that does tanks with the stuff. They steam clean the tank first then apply multiple coats. It worked really well. The downside is that it takes days to dry. Caswells is a clear 2 part epoxy that is ready the next day so thats what I went with instead |
|
| Author: | v4rick [ Sat Mar 29, 2014 8:10 pm ] |
| Post subject: | Re: any one used this tank sealant ?? |
J-B Weld actually held on my VF500 at the low point of the tank for 2+ years. May have held indefinitely if I hadn't purchased a tank with less rust and damage. |
|
| Author: | cyclebuster [ Sat Mar 29, 2014 8:48 pm ] |
| Post subject: | Re: any one used this tank sealant ?? |
it works fine, but does not cover what they say. buy extra. |
|
| Author: | mouth [ Sun Mar 30, 2014 7:56 am ] |
| Post subject: | Re: any one used this tank sealant ?? |
I used this stuff paid 50.00 CDN for a quart You could probably get it cheaper there the tech sheet speaks for itself http://www.ashland.com/Ashland/Static/D ... 70-300.pdf |
|
| Author: | III [ Sun Mar 30, 2014 8:12 am ] |
| Post subject: | Re: any one used this tank sealant ?? |
cyclebuster wrote: it works fine, but does not cover what they say. buy extra. So, you're saying that you have used it and one quart or pint can as shown wont cover an H1 tank? |
|
| Author: | Jim [ Sun Mar 30, 2014 8:33 am ] |
| Post subject: | Re: any one used this tank sealant ?? |
mouth wrote: I used this stuff paid 50.00 CDN for a quart You could probably get it cheaper there the tech sheet speaks for itself http://www.ashland.com/Ashland/Static/D ... 70-300.pdf That could well be the stuff the Caswell repackages and sells as Phenol Novolac Epoxy Tank Sealer. |
|
| Author: | ericsattic [ Sun Mar 30, 2014 1:25 pm ] |
| Post subject: | Re: any one used this tank sealant ?? |
I am not a regular member on this board and do not log in frequently. I did for another reason and stumbled on this thread. I HAVE used this Red Kote tank liner on a recent project and it worked great. I had a old Yamaha fuel tank that had been lined several years ago but that very old liner was slowly disintegrating and small pieces were clogging the petcock / fuel filters. So I cleaned out the tank as best as possible and re-lined it with this red kote stuff. It works fantastic and one of the things the instructions say is that it is great for coating and covering all sorts of crap in fuel tanks to include rust and old liners. I do recommend you let it dry a lot longer than they say too, luckily its been winter and I had no need for the tank and after re-lining I had it painted. The liner leaves a nice smooth red rubbery coat inside the tank. Best Regards, Eric |
|
| Page 1 of 4 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|