Taken from the front of my KH 500 parts catalogue
Apologies about the orientation but on my mobile and it won't let me edit it
Gary T
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Kaw Bolt Codes http://www.kawi2strokes.com/forum/viewtopic.php?f=2&t=6552 |
Page 1 of 2 |
| Author: | mraxl [ Sun Jul 28, 2013 11:46 am ] |
| Post subject: | Kaw Bolt Codes |
I have been trying to sort out Kaw bolt codes and at a loss for missing ciphers. Typical = xxx n yy zz (s) n = ??? s = ??? yy = dia zz = length xxx BOLTS/SCREWS 110 = hex head 112 = upset 113 = hex 114 = hex 115 = small upset 116 = hex 172 = stud 211 = pan head 212 = countersunk 220 = pan head 221 = countersunk 222 = oval countersunk 291 = slotted I'm pretty certain that somewhere in the code is thread pitch and plating type. Does anyone know anything more than what is shown? What are the alpha characters showing? What is the diff between the various hex codes? Suffix letters? |
|
| Author: | scouse [ Mon Jul 29, 2013 1:28 pm ] |
| Post subject: | Re: Kaw Bolt Codes |
Taken from the front of my KH 500 parts catalogue Apologies about the orientation but on my mobile and it won't let me edit it Gary T |
|
| Author: | III [ Mon Jul 29, 2013 3:04 pm ] |
| Post subject: | Re: Kaw Bolt Codes |
Perhaps I can help? Attachment: IMAG0619.jpg
|
|
| Author: | mraxl [ Mon Jul 29, 2013 3:45 pm ] |
| Post subject: | Re: Kaw Bolt Codes |
Thanks, Gary. That was in some of my material if I had just looked! So "n" is material finish. Does anyone know what the "n" codes represent in terms of finish? That must mean that "xxx" codes contain pitch info as well as head type? |
|
| Author: | III [ Mon Jul 29, 2013 4:54 pm ] |
| Post subject: | Re: Kaw Bolt Codes |
Aw c'mon Dale. You said you was gonna lay off that XXX (Triple X) stuff man..... 
|
|
| Author: | rusty34 [ Thu Aug 01, 2013 12:22 pm ] |
| Post subject: | Re: Kaw Bolt Codes |
Is "N" possibly for Chrome plate finish? Thanks for doing this mxaxl!! |
|
| Author: | III [ Thu Aug 01, 2013 3:27 pm ] |
| Post subject: | Re: Kaw Bolt Codes |
rusty34 wrote: Is "N" possibly for Chrome plate finish? Thanks for doing this mxaxl!! hhmmmmm your post made me think, (I know scary right?) that perhaps the N is for Nickel plated?  On the old board, I do recall someone who posted some good info about the codes. He was also selling a bunch of it too I recall. |
|
| Author: | mraxl [ Thu Aug 01, 2013 4:04 pm ] |
| Post subject: | Re: Kaw Bolt Codes |
Yes, I think N, H, & D are chrome but not taken time to sort it all out. I was hoping someone had already ciphered it. |
|
| Author: | rusty34 [ Thu Aug 01, 2013 4:40 pm ] |
| Post subject: | Re: Kaw Bolt Codes |
I was thinking it must be for chrome but you could be right III, might be nickel. Looks like it is indicating a different type of bright finish though, at least by the examples below. 113N1240A RF footrest mtg bolt 114N0825 brake pedal bolt 318N0800 gear change linkage nut, RH thread, 8mm (LH thread 8mm nut is 92017-010) 312N0600 master cylinder lever nut, 6mm 312N0800 master cylinder lever adjuster nut, 8mm 110N0625 master cylinder holder bolts (superseded by 112N0625) |
|
| Author: | Bobby-S [ Thu Aug 01, 2013 10:25 pm ] |
| Post subject: | Re: Kaw Bolt Codes |
I had started work on this but... this is as far as I got: http://www.rlstout.com/Hardware%20Kawasaki%20STD.htm |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|