Kawi2strokes.com Forum
http://www.kawi2strokes.com/forum/

Thanks Henry!
http://www.kawi2strokes.com/forum/viewtopic.php?f=2&t=5849		 Page 1 of 1
Author:  scrambler73 [ Wed Mar 20, 2013 10:33 pm ]
Post subject:  Thanks Henry!
Got 'em today... Perfect fit. :thumbup: :thumbup: :thumbup:

Image
Image
Image

Henry was kind enough to whip up some billet spacers for the Lesters. I'm moving them over from the H2 to the H1, and will use the Akronts on a future project.
What's funny is that I thought I was going to be adding weight by mounting the Lesters, but it turns out I knocked almost 2 pounds off of the weight of the Aluminum Akronts. :lol: Whooda thunk?

Also lost another pound by moving the Hagons over from the hybrid. (Billet Works Shocks are each 8oz heavier :shock:)
The chrome HAGON decals looked dumb so had these Red/Black ones made (thanks mn-mark!)

and yeah.. I've got some "detailing" to do. The bike has been uncovered in the dusty shop since the begining of November.

I HATE Winter
Author:  BarryB [ Wed Mar 20, 2013 10:40 pm ]
Post subject:  Re: Thanks Henry!
Looking good Cody (except for what looks like an EU fender - HA!). I like my Hagons - they handle my 240lbs butt well. So I don't worry too much about the weight I can trim off my H2 - LOLOLOLOL.
Author:  Jim [ Wed Mar 20, 2013 10:46 pm ]
Post subject:  Re: Thanks Henry!
scrambler73 wrote:
What's funny is that I thought I was going to be adding weight by mounting the Lesters, but it turns out I knocked almost 2 pounds off of the weight of the Aluminum Akronts. :lol: Whooda thunk?

You can take a guess at whooda thunk. :D

Quote:
The chrome HAGON decals looked dumb so had these Red/Black ones made (thanks mn-mark!)

You'd save another 1/10 ounce by just taking the Hagon labels off and not replacing them, but I have to admit Mark's work looks cool.
Author:  Ja-Moo [ Wed Mar 20, 2013 11:01 pm ]
Post subject:  Re: Thanks Henry!
Someone needs to donate some lesters so we can cut them up.......... :P
Author:  Looney Cylinders [ Wed Mar 20, 2013 11:28 pm ]
Post subject:  Re: Thanks Henry!
The H1 hub weighs 7+ lbs (10mm wider than S, with a big steel insert cast into the center). Your S hub on the Hybrid weighs around 4lbs...I think you will be pleased with the weight its wheel comes in at, that will under cut the Lester. ;)

J
Author:  Walms [ Thu Mar 21, 2013 8:27 am ]
Post subject:  Re: Thanks Henry!
Looney Cylinders wrote:
I think you will be pleased with the weight its wheel comes in at, that will under cut the Lester. ;)

J


You are going to ruin his day LC! :lol:
Looks good on him though... making the comment about his bike needing detailing and all! Makes the common folk here feel inadequate.
Author:  saint barry [ Thu Mar 21, 2013 9:41 am ]
Post subject:  Re: Thanks Henry!
Cody what size rear tire is that ????? Beautiful bike as always !!!
Author:  scrambler73 [ Thu Mar 21, 2013 9:22 pm ]
Post subject:  Re: Thanks Henry!
saint barry wrote:
Cody what size rear tire is that ????? Beautiful bike as always !!!



130/80-18 on a 3.00" X 18" Wheel.

and thanks guys!
Author:  magee [ Mon Mar 25, 2013 8:38 pm ]
Post subject:  Re: Thanks Henry!
any time Cody :) 6061 T6 cant beat it
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/