Italien guys build water cooled H1 with Aprilia RS 150 barrels but you need to move barrels studs and think also no more oil pump as at this place they put water pump
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| YOUR bike's picture on the board masthead........... http://www.kawi2strokes.com/forum/viewtopic.php?f=2&t=261 |
Page 9 of 9 |
| Author: | husson73 [ Fri Jan 13, 2017 4:09 am ] |
| Post subject: | Re: YOUR bike's picture on the board masthead........... |
Italien guys build water cooled H1 with Aprilia RS 150 barrels but you need to move barrels studs and think also no more oil pump as at this place they put water pump
|
|
| Author: | Walms [ Fri Jan 13, 2017 5:55 am ] |
| Post subject: | Re: YOUR bike's picture on the board masthead........... |
Would you have a link to that project JP? |
|
| Author: | husson73 [ Fri Jan 13, 2017 10:38 am ] |
| Post subject: | Re: YOUR bike's picture on the board masthead........... |
sadly not but should have pictures of this kind of H1 somewhere 
|
|
| Author: | wejext [ Sun Jan 15, 2017 4:47 pm ] |
| Post subject: | Re: YOUR bike's picture on the board masthead........... |
Here we go:   
|
|
| Author: | Ja-Moo [ Sun Jan 15, 2017 5:27 pm ] |
| Post subject: | Re: YOUR bike's picture on the board masthead........... |
Is that a bored out 125 or something? As all I can find is a SR 150 at 10.4 hp........ 
|
|
| Author: | Walms [ Sun Jan 15, 2017 8:01 pm ] |
| Post subject: | Re: YOUR bike's picture on the board masthead........... |
Wow, very nice! RS125? |
|
| Author: | husson73 [ Mon Jan 16, 2017 2:13 am ] |
| Post subject: | Re: YOUR bike's picture on the board masthead........... |
In italy you couldn't go on highway with a 125cc so all 125cc makers bikes or scooters made overbored 150cc which can legally run in highway. From memory H1 with 150cc barrels from Aprilia is around 469cc and the power of a road 125cc Aprilia is 30 hp +
|
|
| Author: | wejext [ Mon Jan 16, 2017 5:13 am ] |
| Post subject: | Re: YOUR bike's picture on the board masthead........... |
Before it is getting into a guessing game: this cylinder kit comes from Polini - an Italian supplier for scooters! |
|
| Author: | husson73 [ Mon Jan 16, 2017 5:57 am ] |
| Post subject: | Re: YOUR bike's picture on the board masthead........... |
in French but with pictures and you can read numbers 37 HP at 11.000 RPM it is written http://www.rrd-preparation.com/fr/kit-h ... egaso.html |
|
| Author: | Walms [ Mon Jan 16, 2017 8:07 am ] |
| Post subject: | Re: YOUR bike's picture on the board masthead........... |
Sweet! RZ jugs might be more frugal on this side of the pond but very cool project! |
|
| Page 9 of 9 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|