Ja-Moo wrote:
There goes any 350 projects........... 
We have one set of +1.50mm oversize pistons on the shelf...come and get em!!
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| If you want Wossner 400 pistons, pre-order here...... http://www.kawi2strokes.com/forum/viewtopic.php?f=2&t=2124 |
Page 3 of 7 |
| Author: | Wossner Pistons [ Tue Feb 28, 2012 6:24 pm ] |
| Post subject: | Re: If you want Wossner 400 pistons, pre-order here...... |
Ja-Moo wrote: There goes any 350 projects........... We have one set of +1.50mm oversize pistons on the shelf...come and get em!!
|
|
| Author: | Ja-Moo [ Tue Feb 28, 2012 8:04 pm ] |
| Post subject: | Re: If you want Wossner 400 pistons, pre-order here...... |
Wossner Pistons wrote: Ja-Moo wrote: There goes any 350 projects........... We have one set of +1.50mm oversize pistons on the shelf...come and get em!! I snoozed.......  need 1.0 overs......... too much porting to lose a bore.And is it really that hard to do more, since the design part is done? |
|
| Author: | Wossner Pistons [ Tue Feb 28, 2012 9:27 pm ] |
| Post subject: | Re: If you want Wossner 400 pistons, pre-order here...... |
Ja-Moo wrote: Wossner Pistons wrote: Ja-Moo wrote: There goes any 350 projects........... We have one set of +1.50mm oversize pistons on the shelf...come and get em!! I snoozed....... need 1.0 overs......... too much porting to lose a bore.And is it really that hard to do more, since the design part is done? As a custom piston we can make them, about 150 per piston. John |
|
| Author: | Ja-Moo [ Tue Feb 28, 2012 9:33 pm ] |
| Post subject: | Re: If you want Wossner 400 pistons, pre-order here...... |
Wossner Pistons wrote: As a custom piston we can make them, about 150 per piston. John piston or kit? |
|
| Author: | Wossner Pistons [ Tue Feb 28, 2012 10:07 pm ] |
| Post subject: | Re: If you want Wossner 400 pistons, pre-order here...... |
Ja-Moo wrote: Wossner Pistons wrote: As a custom piston we can make them, about 150 per piston. John piston or kit? Per piston so 450 a kit unless you have a dealer account or can get a better deal from Jim H. They are now a custom non stocking piston now since we have finally sold the other pistons. RB said he had some other pistons for sale and they may be cheaper? John |
|
| Author: | Ja-Moo [ Tue Feb 28, 2012 10:55 pm ] |
| Post subject: | Re: If you want Wossner 400 pistons, pre-order here...... |
Wossner Pistons wrote: Ja-Moo wrote: Wossner Pistons wrote: As a custom piston we can make them, about 150 per piston. John piston or kit? Per piston so 450 a kit unless you have a dealer account or can get a better deal from Jim H. They are now a custom non stocking piston now since we have finally sold the other pistons. RB said he had some other pistons for sale and they may be cheaper? John I don't like cast pistons....... And I will give Jim a call.... |
|
| Author: | JimH [ Fri Mar 30, 2012 7:59 am ] |
| Post subject: | Re: If you want Wossner 400 pistons, pre-order here...... |
Sorry we could not get this off the ground. I'll be cancelling all the preorders at this point. As was mentioned we can always do individual orders as custom if needed. |
|
| Author: | Ja-Moo [ Fri Mar 30, 2012 11:55 am ] |
| Post subject: | Re: If you want Wossner 400 pistons, pre-order here...... |
JimH wrote: Sorry we could not get this off the ground. I'll be cancelling all the preorders at this point. As was mentioned we can always do individual orders as custom if needed. that's too bad. thanks for trying. Too bad this got off on the wrong foot, as Dale was ready to buy a run of them. |
|
| Author: | Wossner Pistons [ Fri Mar 30, 2012 12:03 pm ] |
| Post subject: | Re: If you want Wossner 400 pistons, pre-order here...... |
Fast in the Past will have a further announcement regarding the upcoming Wossner Forged Pistons for the Kawasaki S3 models.. John |
|
| Author: | Ja-Moo [ Fri Mar 30, 2012 12:18 pm ] |
| Post subject: | Re: If you want Wossner 400 pistons, pre-order here...... |
Wossner Pistons wrote: Fast in the Past will have a further announcement regarding the upcoming Wossner Forged Pistons for the Kawasaki S3 models.. John well cool! |
|
| Page 3 of 7 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|