Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Sat Apr 27, 2024 12:49 pm

All times are UTC - 5 hours




Post new topic Reply to topic  [ 16 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Nice transfers.....
PostPosted: Tue Nov 08, 2011 11:34 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
100cc's.... :thumbup:

Image

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........


Top
 Profile  
 
 Post subject: Re: Nice transfers.....
PostPosted: Tue Nov 08, 2011 11:35 pm 
User avatar

Joined: Wed Jun 08, 2011 11:34 pm
Posts: 9840
Location: North Central NC
Are all three cylinders like that?

_________________
If it surges, that's normal, upshift.


Top
 Profile  
 
 Post subject: Re: Nice transfers.....
PostPosted: Tue Nov 08, 2011 11:43 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
Jim wrote:
Are all three cylinders like that?


depends on how many motors you have, one per....... :P

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........


Top
 Profile  
 
 Post subject: Re: Nice transfers.....
PostPosted: Wed Nov 09, 2011 12:38 am 
User avatar

Joined: Wed Jun 08, 2011 10:23 pm
Posts: 3825
Location: Colorado Springs, CO. USA
Is this what you had done today when you were so busy - :lol:

_________________
This is true. Where I grew up the hills were so steep and long, when your ball rolled down the hill you just said "screw it"...


Top
 Profile  
 
 Post subject: Re: Nice transfers.....
PostPosted: Wed Nov 09, 2011 12:55 am 

Joined: Thu Jun 09, 2011 6:39 pm
Posts: 736
Location: Narooma NSW Aus
how would a H2 go with ports that big :shock: , double the size


Top
 Profile  
 
 Post subject: Re: Nice transfers.....
PostPosted: Wed Nov 09, 2011 1:17 am 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
BarryB wrote:
Is this what you had done today when you were so busy - :lol:


No, actually........ :e11 My machinist was dropping off a set of cases he glass beaded, and was also dropping off a couple of cylinders he bored for someone else in RR.

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........


Top
 Profile  
 
 Post subject: Re: Nice transfers.....
PostPosted: Wed Nov 09, 2011 1:47 am 
User avatar

Joined: Wed Jun 08, 2011 10:23 pm
Posts: 3825
Location: Colorado Springs, CO. USA
:e11 :e11 :e11 :e11 :e11 :e11 :e11 :e11 Back at ya ---- you just wait till May :? :? :? :? :shock: :shock: :shock: :shock: :o :o :o :o :o :o :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen:

_________________
This is true. Where I grew up the hills were so steep and long, when your ball rolled down the hill you just said "screw it"...


Top
 Profile  
 
 Post subject: Re: Nice transfers.....
PostPosted: Wed Nov 09, 2011 9:41 am 
User avatar

Joined: Wed Jun 08, 2011 11:34 pm
Posts: 9840
Location: North Central NC
Ja-Moo wrote:
Jim wrote:
Are all three cylinders like that?


depends on how many motors you have, one per....... :P

Well, that's no good then.

_________________
If it surges, that's normal, upshift.


Top
 Profile  
 
 Post subject: Re: Nice transfers.....
PostPosted: Wed Nov 09, 2011 11:28 am 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
Jim wrote:
Ja-Moo wrote:
Jim wrote:
Are all three cylinders like that?


depends on how many motors you have, one per....... :P

Well, that's no good then.


Well, 100's, you would need 5 for a 500, and a motor wider than a CBX.............. :o :wtf: :lol:

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........


Top
 Profile  
 
 Post subject: Re: Nice transfers.....
PostPosted: Wed Nov 09, 2011 1:34 pm 

Joined: Thu Jun 09, 2011 8:33 pm
Posts: 50
Location: Stuart, FL
Jeeez, someone going for a land speed record?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 16 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group