Kawi2strokes.com Forum

Anyone know who's bike this is? I would like to ask them a couple of questions about it.

Yeah, like where did the front brakes come from??? Nice.

_________________
Rotortech
Indianapolis
1974 S3

Ha !
Look who's in the picture....

_________________
Busy doing more riding than wrenching.......

Grizzly Adams?........

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........

I'll bite... The owner of the bike?

Still, 1 equation, 2 unknowns...

_________________


http://kawatriple.com/wtf/

Tokico calipers from what I can see....

Those are not cut stock rotors......

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........

I like the 69/70 DT1 in the background. Looks like a nice complete bike except missing the mirror. Nice!

_________________
74 H2B with reeds and 34mm carbs
75 S3A Ram Air with reeds and 30mm carbs
73 S2A (wife's bike)
71 Yammi RT1B
83 HD Sportster
03 Yammi R1
06 Kaw 750 Vulcan (wife’s bike)
12 Yammi vstar 250 (wife’s bike)

From some sifting through brake rotors on Ebay, I figured out that the rotors on the bike are from a cbr f4i. I don't know yet if the bolt pattern and the center hole is the same, or if some machine work was done. It does appear to be a stock H series hub. I'll take a guess on the calipers and say that they were from a pre radial brake gsxr 600 or 750. The caliper adapters look like some very nice cnc jobs.

I would still like to know how much machine work was needed to get this to all work. If you look closely at the hub there looks like there are somekind of machine marks on the edge where the rotor sits(inbetween every mounting bolt).