I've been contacted about making a set of S1 chamber spigots ( exhaust flanges for chambers)
Anyone who may be interested in a set? Need to determine how much material to get.
Jeff
EDIT
These are S1 , not S2
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| S1 chamber spigots Any interest? http://www.kawi2strokes.com/forum/viewtopic.php?f=2&t=14139 |
Page 1 of 2 |
| Author: | JRD [ Sat Jun 06, 2020 9:23 am ] |
| Post subject: | S1 chamber spigots Any interest? |
I've been contacted about making a set of S1 chamber spigots ( exhaust flanges for chambers) Anyone who may be interested in a set? Need to determine how much material to get. Jeff EDIT These are S1 , not S2
|
|
| Author: | JRD [ Mon Jun 08, 2020 7:04 pm ] |
| Post subject: | Re: S2 chamber spigots Any interest? |
Doesn't seem to be a lot of interest so these will be made to order when needed. I will just be making the set that was ordered. Jeff |
|
| Author: | canukvt [ Sun Jun 28, 2020 7:19 am ] |
| Post subject: | Re: S2 chamber spigots Any interest? |
do you have pictures? michel |
|
| Author: | JRD [ Fri Jul 03, 2020 9:30 pm ] |
| Post subject: | Re: S2 chamber spigots Any interest? |
canukvt wrote: do you have pictures? michel Just finished the welding fixture this afternoon. I'll put up pics in a day or two Jeff |
|
| Author: | JRD [ Sun Jul 05, 2020 11:02 am ] |
| Post subject: | Re: S1 chamber spigots Any interest? |
Set of three S1 flanges / exhaust spigots with a H1/H2 in the back for size comparison S1 are 1-3/4 in diameter and 1-3/4" long. The H1/H2 are 1-7/8" in diameter and 2" long Jeff Attachment: S1 flanges.jpg
|
|
| Author: | Jim [ Sun Jul 05, 2020 11:26 am ] |
| Post subject: | Re: S1 chamber spigots Any interest? |
JRD wrote: EDIT These are S1 , not S2 They're the same. |
|
| Author: | JRD [ Sun Jul 05, 2020 12:10 pm ] |
| Post subject: | Re: S1 chamber spigots Any interest? |
Jim wrote: JRD wrote: EDIT These are S1 , not S2 They're the same. Good to know. The drawing I got said S1 Thanks |
|
| Author: | Jim [ Sun Jul 05, 2020 12:39 pm ] |
| Post subject: | Re: S1 chamber spigots Any interest? |
Denco sold the same chambers for S1 and S2, so not only are the adapters the same, everything is. |
|
| Author: | kawi3cyl [ Sun Jul 05, 2020 9:48 pm ] |
| Post subject: | Re: S1 chamber spigots Any interest? |
Those are BEAUTIFUL Jeff - nice work! They look stainless...? 
|
|
| Author: | JRD [ Mon Jul 06, 2020 9:48 am ] |
| Post subject: | Re: S1 chamber spigots Any interest? |
Thanks, no not stainless, just somewhat polished to remove the weld discoloration. They are steel. Jeff |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|