| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| 750 h2 oil pump need cable breaket tab is broken off http://www.kawi2strokes.com/forum/viewtopic.php?f=2&t=13875 |
Page 1 of 1 |
| Author: | ironhd80 [ Mon Aug 12, 2019 10:26 pm ] |
| Post subject: | 750 h2 oil pump need cable breaket tab is broken off |
Need cable breaket for h2 750 oil pump tab is broken off. |
|
| Author: | Tim Steele [ Tue Aug 13, 2019 12:36 am ] |
| Post subject: | Re: 750 h2 oil pump need cable breaket tab is broken off |
Drill a hole in it even with the broken tab and safety wire the cable end to it until you find one. I will look through my parts pumps and see if I have a good one. |
|
| Author: | ironhd80 [ Tue Aug 13, 2019 12:43 am ] |
| Post subject: | Re: 750 h2 oil pump need cable breaket tab is broken off |
Good idea thank you hope i find one i checked ebay nothing yet. |
|
| Author: | Jim [ Tue Aug 13, 2019 8:13 am ] |
| Post subject: | Re: 750 h2 oil pump need cable breaket tab is broken off |
They can be repaired, and you can even put a tab on in a different place so when you're using 34mm carbs the cable doesn't get bent badly at the end of the travel. Having or knowing someone with a TIG welder helps. |
|
| Author: | ironhd80 [ Tue Aug 13, 2019 12:12 pm ] |
| Post subject: | Re: 750 h2 oil pump need cable breaket tab is broken off |
How are you Jim still make pipes and CDI boxes |
|
| Author: | Jim [ Tue Aug 13, 2019 6:05 pm ] |
| Post subject: | Re: 750 h2 oil pump need cable breaket tab is broken off |
Hi Richard. I still do the electronics and plan to keep doing it, but chambers are pretty much on hold for now. I don't have the time any more, and the guy I had fabricating them is too busy himself now. If you strike out with the oil pump pulley and don't have TIG available, you can make a little loop to replace the broken one, and make it overlap the disk a little. Mark where it goes and mail it to me. I'll weld it on and mail it back. |
|
| Author: | ironhd80 [ Tue Aug 13, 2019 6:32 pm ] |
| Post subject: | Re: 750 h2 oil pump need cable breaket tab is broken off |
Thanks jim i will need a cdi box for a 69 500 soon |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|