Ja-Moo wrote:
Came home and decided to try out my new lathe, I like it! 
I'm glad you like your new svarv.
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Sometimes everything is just right and the motor sings! http://www.kawi2strokes.com/forum/viewtopic.php?f=2&t=1375 |
Page 3 of 4 |
| Author: | Jim [ Mon Oct 17, 2011 8:55 am ] |
| Post subject: | Re: Sometimes everything is just right and the motor sings! |
Ja-Moo wrote: Came home and decided to try out my new lathe, I like it! I'm glad you like your new svarv. |
|
| Author: | Ja-Moo [ Mon Oct 17, 2011 11:46 am ] |
| Post subject: | Re: Sometimes everything is just right and the motor sings! |
Jim wrote: Ja-Moo wrote: Came home and decided to try out my new lathe, I like it! I'm glad you like your new svarv. 其实它应该是车床。作为我便宜的私生子。 |
|
| Author: | Jim [ Mon Oct 17, 2011 12:31 pm ] |
| Post subject: | Re: Sometimes everything is just right and the motor sings! |
Ja-Moo wrote: 其实它应该是车床。作为我便宜的私生子。 What the heck did you type into Google translator? When I put the above in, the translation to English is "In fact, it should be turning. As my cheap bastard." |
|
| Author: | Ja-Moo [ Mon Oct 17, 2011 12:44 pm ] |
| Post subject: | Re: Sometimes everything is just right and the motor sings! |
Jim wrote: Ja-Moo wrote: 其实它应该是车床。作为我便宜的私生子。 What the heck did you type into Google translator? When I put the above in, the translation to English is "In fact, it should be turning. As my cheap bastard." Don't you love translators!  "In fact it should be lathe, as I as a cheap bastard".........
|
|
| Author: | Ja-Moo [ Mon Oct 17, 2011 1:27 pm ] |
| Post subject: | Re: Sometimes everything is just right and the motor sings! |
I need to order cutters, as all I had here was a finishing cutter. I had a crap head to play with, and didn't really do more than do some cuts. It will work just fine! 
|
|
| Author: | BarryB [ Mon Oct 17, 2011 1:38 pm ] |
| Post subject: | Re: Spoke too soon. |
Took the H2 out again yesterday for a few errands and it ran like crap, like the chain was WAYYYY to tight, seemed to work just to get moving... High revs ok but just seemed to work to hard to move, sometimes I HATE owning this thing for so many years, even a little twitch I notice (because I know when it's good or bad or just not right). The motor has been tired for years though, been something like 20+ since the bottom end was gone though. I have time before the GAP next year, maybe I'll just tear it down this winter and do a crank and general lower end check and fix. The broken return spring on the kick starter has been a royal PITA for 15 years and especially since I went with the longer shocks it's REALLY a PITA reaching down to pull it up (longer reach with one leg on the ground reaching - belly bigness not help either - shut up John I know what you're thinking  ).
|
|
| Author: | Ja-Moo [ Mon Oct 17, 2011 1:45 pm ] |
| Post subject: | Re: Spoke too soon. |
BarryB wrote: shut up John I know what you're thinking ).Why shut-up? You don't care!...........
|
|
| Author: | Jim C [ Mon Oct 17, 2011 1:53 pm ] |
| Post subject: | Re: Sometimes everything is just right and the motor sings! |
I'm sure you checked but once had a disc brake piston that was sticky nad made the bike slow Hey, at least it's not gonna blow now |
|
| Author: | BarryB [ Mon Oct 17, 2011 2:18 pm ] |
| Post subject: | Re: Spoke too soon. |
Ja-Moo wrote: BarryB wrote: shut up John I know what you're thinking ).Why shut-up? You don't care!........... Shut up twice you skinny bastard - or Mark and I will take our cut-off fingers and kick your butt! HA! 
|
|
| Author: | Ja-Moo [ Mon Oct 17, 2011 3:07 pm ] |
| Post subject: | Re: Spoke too soon. |
BarryB wrote: Ja-Moo wrote: BarryB wrote: shut up John I know what you're thinking ).Why shut-up? You don't care!........... Shut up twice you skinny bastard - or Mark and I will take our cut-off fingers and kick your butt! HA! Yeah, 190 is "skinny"...... And you will have to get your fingers out of your noses first...... 
|
|
| Page 3 of 4 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|