Yes, making motorcycle parts as usual. No complaints.
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Quiet today - are we working? http://www.kawi2strokes.com/forum/viewtopic.php?f=2&t=13448 |
Page 1 of 2 |
| Author: | BarryB [ Fri Jun 08, 2018 6:58 pm ] |
| Post subject: | Quiet today - are we working? |
New sprockets and chain. Installing them will take minutes. Cleaning all the grunge in the hub and dampener areas - hours. |
|
| Author: | ThatGPzGuy [ Fri Jun 08, 2018 7:00 pm ] |
| Post subject: | Re: Quiet today - are we working? |
Was adjusting my air screws while the bike was running. Noticed the carbs were leaking. Sigh... I hate taking the carbs off. |
|
| Author: | Jim [ Fri Jun 08, 2018 7:45 pm ] |
| Post subject: | Re: Quiet today - are we working? |
Yes, making motorcycle parts as usual. No complaints.
|
|
| Author: | Evans Ward [ Fri Jun 08, 2018 7:58 pm ] |
| Post subject: | Re: Quiet today - are we working? |
Yes here on a Lawn Boy- at least it is a 2 stroke! 
|
|
| Author: | suthernS2 [ Fri Jun 08, 2018 8:35 pm ] |
| Post subject: | Re: Quiet today - are we working? |
I rode 3 different bikes today. It was sorta hard work taking them off their center stands.
|
|
| Author: | Jim [ Fri Jun 08, 2018 11:10 pm ] |
| Post subject: | Re: Quiet today - are we working? |
Good going, Buddy! |
|
| Author: | demus [ Sat Jun 09, 2018 8:51 am ] |
| Post subject: | Re: Quiet today - are we working? |
I was at work yesterday but got NOTHING done, sometimes biding out jobs and writing contracts gets sooooo boring and tedious I end up spending my day working on questions that dont need to be answered  I should be a bit more diligent at work, that was the second friday in a row …last friday I didn't even go in. This is starting to look like a habit  Today however I am going to be diligent, got a old suzuki tank with the caswell peeling off and causing problems , going to work on getting that out, and a bit later try out some new jetting on the H2. |
|
| Author: | Ja-Moo [ Sat Jun 09, 2018 10:57 am ] |
| Post subject: | Re: Quiet today - are we working? |
demus wrote: I was at work yesterday but got NOTHING done, sometimes biding out jobs and writing contracts gets sooooo boring and tedious I end up spending my day working on questions that dont need to be answered . Which blue do you like better?
|
|
| Author: | JRD [ Sat Jun 09, 2018 11:44 am ] |
| Post subject: | Re: Quiet today - are we working? |
Jim wrote: Yes, making motorcycle parts as usual. No complaints. Doing heli coils in two oil pumps, one "missing tab" hold down and a CV driveshaft conversion for a Cub Cadet diesel lawn and garden tractor. |
|
| Author: | Retro 3 [ Sat Jun 09, 2018 12:41 pm ] |
| Post subject: | Re: Quiet today - are we working? |
Doing the front fork emulator mod on the H2. Instructions say to "remove original dampening disc". Anyone do this? What parts are to be left out? On the resource site; John's picture 1 of the assembled parts has the small spring and notched disc, his picture 2 doesn't show these. |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|