Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
Repo switches http://www.kawi2strokes.com/forum/viewtopic.php?f=2&t=13220 |
Page 1 of 2 |
Author: | cobraace [ Mon Dec 18, 2017 11:26 am ] |
Post subject: | Repo switches |
How many have used the repo switches .are close to originals 72 H2 |
Author: | cobraace [ Mon Dec 18, 2017 4:14 pm ] |
Post subject: | Re: Repo switches |
Like this http://www.diablocycle.com/Kawasaki-H2- ... tches.html |
Author: | Zambia [ Mon Dec 18, 2017 9:44 pm ] |
Post subject: | Re: Repo switches |
I haven't used them, but I've held them in my hands and they are not awesome quality. The switches don't fit flush to the housing and the whole casting is rather poor. |
Author: | cobraace [ Tue Dec 19, 2017 9:50 am ] |
Post subject: | Re: Repo switches |
That is not good |
Author: | Zambia [ Tue Dec 19, 2017 2:38 pm ] |
Post subject: | Re: Repo switches |
I didn't mean to "kill" the idea - for a rider and if you have no other option, I would say they're fine. But for a decent resto, you'd be better off restoring an OEM piece. I had an idea of stripping one down for the wiring and switches and mounting it on the restored OEM housing....but I'm too lazy. |
Author: | III [ Tue Dec 19, 2017 3:29 pm ] |
Post subject: | Re: Repo switches |
If they are not scarred or have bad gouges and marks, restore the ones you have. Strip them and polish them up and repaint where needed. All the inner parts can be repaired or cleaned up. |
Author: | Zambia [ Tue Dec 19, 2017 10:28 pm ] |
Post subject: | Re: Repo switches |
Here are 2 examples - images borrowed from eBay ads: Old - decent build quality New - cheap build quality |
Author: | cobraace [ Thu Dec 21, 2017 12:08 pm ] |
Post subject: | Re: Repo switches |
Thank you for the info . Looking for short cuts trying to finish bike for Deals Gap I have cancer and this is the last chance I got to make may have to buy one but I am going. |
Author: | cobraace [ Thu Dec 21, 2017 12:11 pm ] |
Post subject: | Re: Repo switches |
Looking forward to meeting you guys and smelling the smoke |
Author: | Jim [ Thu Dec 21, 2017 12:38 pm ] |
Post subject: | Re: Repo switches |
I'm looking forward to meeting you too, Cobraace. |
Page 1 of 2 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |