PICTURE PLEASE????
There is a grease fitting on swing arms, no oil lines I know of
Also helpful to know which model.
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| swing arm oil line? http://www.kawi2strokes.com/forum/viewtopic.php?f=2&t=12737 |
Page 1 of 1 |
| Author: | Deamn [ Mon May 01, 2017 12:09 am ] |
| Post subject: | swing arm oil line? |
the swing arm have an oil connector, where i can connect this? |
|
| Author: | III [ Mon May 01, 2017 3:31 am ] |
| Post subject: | Re: swing arm oil line? |
| PICTURE PLEASE???? There is a grease fitting on swing arms, no oil lines I know of Also helpful to know which model. |
|
| Author: | H2RTuner [ Mon May 01, 2017 12:02 pm ] |
| Post subject: | Re: swing arm oil line? |
I suspect this is the early years H2 chain oiler tank, hand pump mounted to the left chassis rear down tube, and oil lines??? If so, the long line from the pump goes into a hole in the top of the aluminum front sprocket cover screwed to the side of the engine cases just inboard of the shifter lever. Some early covers have the hole, later ones don't have the hole, nor the tank/pump. hat is as close as I can come with the description given. |
|
| Author: | III [ Mon May 01, 2017 12:15 pm ] |
| Post subject: | Re: swing arm oil line? |
As I suspected he meant Dave, just figured it best to ask him to expound a bit.... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|