| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| 72H1B exhaust system http://www.kawi2strokes.com/forum/viewtopic.php?f=2&t=12683 |
Page 1 of 1 |
| Author: | rshaw [ Thu Apr 13, 2017 9:55 am ] |
| Post subject: | 72H1B exhaust system |
I was looking for expertise I don't have. I have a recently purchased H1B and the gentleman rigged a later model (1974 ) example exhaust to fit. However, After spending all winter getting it ready, The system leaks oil from the collar areas onto the shelf below. Everything tight and new compression washers. I just started looking for a new (stock) system (that belongs on bike, 2 piece) and they are hard to come by, not to mention: Expensive!!!! John, from Mid Atlantic has a couple left, but says they are for a 1969-71 H1, but, will fit mine, but, may have to file one of the mounting holes some???????? Does anyone know about this? I was hoping after spending this kind of money, that it would be a perfect, bolt right up. Reason , I want stock, I use and like my Center stand. Any help would be appreciated. Robert |
|
| Author: | mraxl [ Thu Apr 13, 2017 10:05 am ] |
| Post subject: | Re: 72H1B exhaust system |
Mounting stud size & spacing differs on later H1 cyls. All H1/B/C/D are the same. |
|
| Author: | kawi3cyl [ Thu Apr 13, 2017 12:39 pm ] |
| Post subject: | Re: 72H1B exhaust system |
I was under the impression that the exhausts between the 69-71 and 72, though slightly different internally (mainly baffles), are interchangeable for all years 69-72, requiring no mods? |
|
| Author: | kawisideways [ Thu Apr 13, 2017 2:58 pm ] |
| Post subject: | Re: 72H1B exhaust system |
mraxl wrote: Mounting stud size & spacing differs on later H1 cyls. All H1/B/C/D are the same. ??????? |
|
| Author: | mraxl [ Thu Apr 13, 2017 3:24 pm ] |
| Post subject: | Re: 72H1B exhaust system |
kawisideways wrote: mraxl wrote: Mounting stud size & spacing differs on later H1 cyls. All H1/B/C/D are the same. ??????? http://www.kawatriple.com/partid/cylinders/cyldif.htm |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|