Kawi2strokes.com Forum
http://www.kawi2strokes.com/forum/

Which H2 expansion chambers allow centerstand retention?
http://www.kawi2strokes.com/forum/viewtopic.php?f=2&t=12600
Page 1 of 2

Author:  Evans Ward [ Mon Mar 20, 2017 7:35 pm ]
Post subject:  Which H2 expansion chambers allow centerstand retention?

I believe J&R's as well as one version of the Spec II's allow centerstand retention. Are there others and which version of the Spec II's? Going to need to bolt the centerstand back up permanently due to a health issue. Bike is a 72 H2. Thanks in advance for the help! :thumbup:

Author:  Zambia [ Mon Mar 20, 2017 9:41 pm ]
Post subject:  Re: Which H2 expansion chambers allow centerstand retention?

Sorry about your issue - is it your back again? Anyway, you're correct about J&Rs and I'm pretty certain on Spec II as well. I had FBG on my H2C and they allowed the stand as well. Here's a quick tip too - my Concours is a bear to get on the centre stand..so i just roll the back trie onto a 2x4 and it makes it dead easy to lift it onto the stand.

Author:  husson73 [ Tue Mar 21, 2017 3:53 am ]
Post subject:  Re: Which H2 expansion chambers allow centerstand retention?

H2 K2 tec standart allow this

Author:  Evans Ward [ Tue Mar 21, 2017 8:10 am ]
Post subject:  Re: Which H2 expansion chambers allow centerstand retention?

Zambia wrote:
Sorry about your issue - is it your back again? Anyway, you're correct about J&Rs and I'm pretty certain on Spec II as well. I had FBG on my H2C and they allowed the stand as well. Here's a quick tip too - my Concours is a bear to get on the centre stand..so i just roll the back trie onto a 2x4 and it makes it dead easy to lift it onto the stand.


Hi Ian! No, not the back as I had that fused at lower cervical about 1 1/2 yrs ago. It's the right hip- degeneration and osteoarthritis. Scheduled for total hip replacement surgery the week after the Gap Meet. Will have to kick from right side of bike with the left leg and centerstand will aid in many ways. After THR, will not be able to kick with right leg. Sucks getting old.....

JP- thanks for letting me know the KTec Standards would work too!

Author:  H1FR [ Tue Mar 21, 2017 9:43 am ]
Post subject:  Re: Which H2 expansion chambers allow centerstand retention?

Customers bike, rebuilt the motor for him. Dencos on a 74 H2B, seemed to clear fine. Pipes had the normal dents from speed bumps, I did not analyze how the pipes cleared the center stand.

Image

Image

Image

Image

Cold start

http://youtu.be/kOjL02IBx1Y

Author:  suthernS2 [ Thu Mar 23, 2017 12:36 pm ]
Post subject:  Re: Which H2 expansion chambers allow centerstand retention?

Just put those nice stock pipes back on Evans. :thumbup:

Author:  Evans Ward [ Thu Mar 23, 2017 1:22 pm ]
Post subject:  Re: Which H2 expansion chambers allow centerstand retention?

suthernS2 wrote:
Just put those nice stock pipes back on Evans. :thumbup:


I'm leaning in that direction Buddy! :thumbup:

Author:  pierrot974 [ Sat Mar 25, 2017 11:56 pm ]
Post subject:  Re: Which H2 expansion chambers allow centerstand retention?

Hi

I wanted to have the main stand.

Here is a pic of my 72 with the K2TEC straight, bought at Webike.

Image

:thumbup:

Author:  Evans Ward [ Sun Mar 26, 2017 11:31 am ]
Post subject:  Re: Which H2 expansion chambers allow centerstand retention?

pierrot974 wrote:
Hi

I wanted to have the main stand.

Here is a pic of my 72 with the K2TEC straight, bought at Webike.

Image

:thumbup:


Those look nice and appear to have more clearance than the criss cross pipes they make. I see they are cheaper on webike than on their eBay store. What's the sound like compared to other popular chambers? Thanks for posting.

Author:  saint barry [ Sun Mar 26, 2017 7:33 pm ]
Post subject:  Re: Which H2 expansion chambers allow centerstand retention?

If you buy the K2tecs the best place to buy them is Webike Japan and watch for their sales !!! Don't by them off eBay,too expensive !!!

Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/