Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Fri Mar 29, 2024 7:11 am

All times are UTC - 5 hours




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Sat Feb 18, 2017 5:20 pm 
User avatar

Joined: Wed Jun 22, 2011 4:33 am
Posts: 99
Location: Christchurch, New Zealand
I have finally gotten around to addressing my tatty old loom on the H1A. I bought a replacement loom from Doremi a couple of years ago and this weekend (eventually :roll: ), pulled it from the packet to begin the job. However, it doesn't look exactly the same as the one that is in situ. The colours of some wires used on the repro one are different (to my existing harness and the wiring diagram in the manual) and there are extra wires in some parts. It does have the two wires with no ends on them that I gather are for the CDI - so, I'm guessing it is meant for the bike.

Could someone with more electrical knowledge than me have a look at the pics below and let me know if this correct for the H1A or if I have been given the wrong one? I don't really want to start pulling the old one out until I'm sure I have an appropriate replacement. Shouldn't they be pretty much a plug and play item?

Thanks heaps

Image

Image

Image

_________________
"If a man over 40 still rides a motorbike, think personality disorder" - A not famous Psychologist


Top
 Profile  
 
PostPosted: Sun Feb 19, 2017 11:39 pm 
User avatar

Joined: Tue Jan 17, 2017 6:02 am
Posts: 95
Location: Helensburgh Australia
I would hazard a guess it's a generic loom to cover all models, the H2 aftermarket loom is the same.

_________________
Cheers Baz.
“I refuse to answer that question on the grounds that I don't know the answer”

1973 H2-A
2000 F650GS BMW


Top
 Profile  
 
PostPosted: Mon Feb 20, 2017 2:28 pm 
User avatar

Joined: Thu Jun 09, 2011 3:06 am
Posts: 4364
Location: PARIS FRANCE
Earlies H1 loom and H2 loom for exemple are rather different 8-)


Top
 Profile  
 
PostPosted: Mon Feb 20, 2017 3:26 pm 
User avatar

Joined: Tue Jan 17, 2017 6:02 am
Posts: 95
Location: Helensburgh Australia
husson73 wrote:
Earlies H1 loom and H2 loom for exemple are rather different 8-)



I meant the H2 loom is the same for all H2 models, not the same as the H1.

The make one loom to cover all H1s :crazy:

_________________
Cheers Baz.
“I refuse to answer that question on the grounds that I don't know the answer”

1973 H2-A
2000 F650GS BMW


Top
 Profile  
 
PostPosted: Tue Feb 21, 2017 5:05 am 
User avatar

Joined: Thu Jun 09, 2011 3:06 am
Posts: 4364
Location: PARIS FRANCE
BazNSW wrote:
husson73 wrote:
Earlies H1 loom and H2 loom for exemple are rather different 8-)



I meant the H2 loom is the same for all H2 models, not the same as the H1.

The make one loom to cover all H1s :crazy:

yes but on the same way earlies H1 looms are also rather differents from later H1.
If you add the fact points earlies H1 et CDI earlies H1 loooms are also different it'sn't easy to know for which H1 model the wiring loom above is made.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group