Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
MAD MAX KZ 1000 Turbo Build..... http://www.kawi2strokes.com/forum/viewtopic.php?f=2&t=11395 |
Page 3 of 6 |
Author: | soflah2b [ Tue Jan 03, 2017 2:29 pm ] |
Post subject: | Re: MAD MAX KZ 1000 Turbo Build..... |
I purchased the bike in 1977 its a Z1, 1973, box stock with a nice windjammer fairing which was taken off immediately and turned into cash. 1981 it went through the change. I am not a tall person so I put KZ750 front fork tubes which are about 2" shorter and replaced the stock wheels with lester's, 16" on the rear which lowered the bike to a flat foot height along with everything else, too much to mention. Can't remember what brand oil cooler I put on would have to look into the receipts. I set it up to return into the center top of the valve cover above the cam chain. Didn't mean to highjack the thread. |
Author: | soflah2b [ Tue Jan 03, 2017 4:43 pm ] |
Post subject: | Re: MAD MAX KZ 1000 Turbo Build..... |
nitrouscarl wrote: Beautiful build, is that a Mikuni HSR 42 carb on that thing? How many pounds of boost ? What kind of ignition retard are you using? Sorry about all the questions but I am interested in all the input I can get, I have heard that it is quite easy to get it wrong. PM me with questions. I would be more than happy to share what I have found. |
Author: | nitrouscarl [ Sat Jan 28, 2017 9:06 am ] |
Post subject: | Re: MAD MAX KZ 1000 Turbo Build..... |
Here are some pics, fuel and air... |
Author: | nitrouscarl [ Mon Mar 13, 2017 8:41 am ] |
Post subject: | Re: MAD MAX KZ 1000 Turbo Build..... |
Here are some pics of the progress this weekend... |
Author: | m in sc [ Thu Mar 16, 2017 12:34 am ] |
Post subject: | Re: MAD MAX KZ 1000 Turbo Build..... |
yesssssssssss |
Author: | Frank [ Sun Mar 19, 2017 7:50 am ] |
Post subject: | Re: MAD MAX KZ 1000 Turbo Build..... |
Cool project, looking forward to sharing your experience. |
Author: | Jim [ Sun Mar 19, 2017 8:40 am ] |
Post subject: | Re: MAD MAX KZ 1000 Turbo Build..... |
Come on down to Deals Gap in May, Frank! |
Author: | nitrouscarl [ Sun Mar 19, 2017 9:51 am ] |
Post subject: | Re: MAD MAX KZ 1000 Turbo Build..... |
Just about done with the carb adapter plate. I will mount the turbo today, then I will be able to run the air and oil lines. |
Page 3 of 6 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |