Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
1002cc stroker h2r rep http://www.kawi2strokes.com/forum/viewtopic.php?f=16&t=9926 |
Page 4 of 4 |
Author: | kwacka.karl [ Sun Feb 22, 2015 4:45 am ] |
Post subject: | Re: 1002cc stroker h2r rep |
Yes i have a 73 and it had handling problems like all of them and that,s why its better left in the seventies and built some-think a bit better that could handle a lot more power . But still looked like a old kawasaki h2r . You did-en mention the carbs i see they are round slides. |
Author: | jyrgNorway [ Sun Feb 22, 2015 3:57 pm ] |
Post subject: | Re: 1002cc stroker h2r rep |
VM34 at the time picture was taken. VM38 powerjetted and UFOed today, and a lot more portwork done than with the 95 rwhp set-up |
Author: | kwacka.karl [ Sun Feb 22, 2015 6:55 pm ] |
Post subject: | Re: 1002cc stroker h2r rep |
I was going to bore my spare set of electrons from 38 to 40 but now may be not .I've been looking for a set of 45 electrons for a wile now they are hard to get secondhand . what size chambers are you running are they tapered headers . kwacka karl ......ozz |
Author: | jyrgNorway [ Mon Feb 23, 2015 5:27 am ] |
Post subject: | Re: 1002cc stroker h2r rep |
Yes. Jollymoto pipes. Modded to get the look I wanted though. And Lectron 36 probably flows just as good as my VM38's. You may try Lectron 40, they are used a lot for HO H2 engines. Some bore them out to 44mm though....... |
Author: | kwacka.karl [ Mon Feb 23, 2015 7:29 pm ] |
Post subject: | Re: 1002cc stroker h2r rep |
If you don,t mind me asking what size are the chambers . I have 118 on the h2r at the moment that's as big as i could fit under it and still have good ground clearance . kwacka karl ozz... |
Author: | jyrgNorway [ Tue Feb 24, 2015 7:43 am ] |
Post subject: | Re: 1002cc stroker h2r rep |
108 or 110mm, don't quite remember |
Author: | captainpooby [ Wed Mar 11, 2015 4:17 pm ] |
Post subject: | Re: 1002cc stroker h2r rep |
Reminds me of my race H2 (also H2B frame w/mods): - ------------------------------------------------------------------------------------------------------- |
Author: | Walms [ Wed Mar 11, 2015 5:01 pm ] |
Post subject: | Re: 1002cc stroker h2r rep |
Nice pipes! |
Page 4 of 4 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |