husson73 wrote:
Zambia wrote:
A cheap option might be to try some VM 38's - I believe they have more linear flow than TM's.
VM are more linear than TM , yes or exactly they are more smothy at low range compare to the TM but at 6500 usually no trouble and no real difference
Have you power jets on your TM
Thats right! Had to open up throttle cutaway alot with the TM's beqouse it was pigrich down low (1/8 throttle)
And that cleared up that area but i need to try smaller nozzles to, only their isn't any avalible.. They are Ski-doo oem. one size only:part number 327 O3
But 159's are the same design and are avalible from size N4 and up, but.. they are a little shorter
But i will try them anyway..
Want to lean her out just to se if that will improve the flatspot? Would be nice to hear what other's use for jetting in their ported H2
Ohh and no i don't have power jets on the TM's (340mj) but i have VM 34's with power jets that i use to run before.
Thank's for your input guy's!