Awesome work PK
.........those should really work well........that stuff looks like jewelry for Men 
THX Phil
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| My H1 Reed Project (picture heavy) http://www.kawi2strokes.com/forum/viewtopic.php?f=16&t=8341 |
Page 3 of 3 |
| Author: | magee [ Mon Oct 12, 2015 3:58 pm ] |
| Post subject: | Re: My H1 Reed Project (picture heavy) |
H2RTuner wrote: REALLY nice work. That should perform very, very well. As an optional setup, I'd like to see a case reed version, single stage reeds, and, 6 transfer port cylinders. Tuner like mine!! very nice work PK. I just got those carbs for another bike im working on. Hope you like them i know i do. |
|
| Author: | H2RTuner [ Mon Oct 12, 2015 4:30 pm ] |
| Post subject: | Re: My H1 Reed Project (picture heavy) |
I'd like to see the cylinders reversed on the cases, reeds on the front of the cases, pipes out under the seat, EFI (which would only need 3 air meters on the front of the engine and the air ducting, no carbs), and the added transfer ports, 6 speed, and liquid cooling. Any variation of this would be nice as well, but, I would go for the gusto, the full tilt boogie. |
|
| Author: | magee [ Tue Oct 13, 2015 11:06 am ] |
| Post subject: | Re: My H1 Reed Project (picture heavy) |
H2RTuner wrote: I'd like to see the cylinders reversed on the cases, reeds on the front of the cases, pipes out under the seat, EFI (which would only need 3 air meters on the front of the engine and the air ducting, no carbs), and the added transfer ports, 6 speed, and liquid cooling. Any variation of this would be nice as well, but, I would go for the gusto, the full tilt boogie. have at it then !! |
|
| Author: | H2RTuner [ Tue Oct 13, 2015 5:52 pm ] |
| Post subject: | Re: My H1 Reed Project (picture heavy) |
Already a many years into it project, with no finish date in sight. Too many other things to get done, no time to do what I need on the project. |
|
| Author: | oxford [ Wed Oct 14, 2015 7:07 am ] |
| Post subject: | Re: My H1 Reed Project (picture heavy) |
Well done PK. How much welding do you have to do for this project? |
|
| Author: | BBP [ Thu Oct 15, 2015 3:13 pm ] |
| Post subject: | Re: My H1 Reed Project (picture heavy) |
Awesome work PK .........those should really work well........that stuff looks like jewelry for Men THX Phil
|
|
| Author: | P.K. [ Sun Oct 18, 2015 12:34 pm ] |
| Post subject: | Re: My H1 Reed Project (picture heavy) |
New versus old, side by side comparison. I used to run the GEM reeds in the late 90s. The new reeds will be significantly closer to the piston.         . |
|
| Page 3 of 3 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|