Kawi2strokes.com Forum
http://www.kawi2strokes.com/forum/

H2 project
http://www.kawi2strokes.com/forum/viewtopic.php?f=16&t=7992		 Page 4 of 4
Author:  Carlos [ Sun Mar 23, 2014 7:54 pm ]
Post subject:  Re: H2 project
I was going to photoshop that fuel tap in the picture :lol:as I knew that it wouldn't escape from RB's eyes.. (it is temporarily there till I get a decent one). Where can I get it?

The logo I made myself in cad, measurements taken from the OEM kh500 tank, reduced, modified and sent to a decal shop to cut them. The stripes were painted, not decals.

Image

Jim, the hydraulic actuator is on plan, but will take a long time to design and make. Now I want to ride the bike and need a quicker solution.
Author:  Jim [ Sun Mar 23, 2014 8:10 pm ]
Post subject:  Re: H2 project
It shouldn't take you long. I did mine when I was 20, from a pencil sketch, using only a lathe and a drill press. :D
Author:  scrambler73 [ Sun Mar 23, 2014 8:26 pm ]
Post subject:  Re: H2 project
I can't come up with a complement that matches the awesomeness of that bike.....

So far above and beyond.

Bravo
Author:  vtcat [ Mon Mar 24, 2014 4:21 am ]
Post subject:  Re: H2 project
Just amazing :clap:
Author:  saint barry [ Tue Mar 25, 2014 1:14 pm ]
Post subject:  Re: H2 project
Carlos,beautiful bike,beautiful work……. Way to go !!!!!!
Author:  Carlos [ Sun Jun 27, 2021 2:59 pm ]
Post subject:  Re: H2 project
Here is a picture of the bike today. Little changes in the intake system, rear shocks adjustments and silencers

Removing the KN pods and returning to the rubber manifold and air box made it much, but really much easier to start and offers better idle/low speed operation.

I try to make it more silent with larger and more refined silencers, but this is a hard task...... This bike is still very noisy..
Author:  Jim [ Sun Jun 27, 2021 3:16 pm ]
Post subject:  Re: H2 project
Thanks for the update Carlos, and it's good to see you post here!
Author:  Tim Steele [ Mon Jun 28, 2021 12:10 am ]
Post subject:  Re: H2 project
Absolutely Beautiful Work!!!
Page 4 of 4 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/