| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| 74 h1 "The Project" http://www.kawi2strokes.com/forum/viewtopic.php?f=16&t=6302 |
Page 9 of 13 |
| Author: | mikeof [ Sun Mar 15, 2015 8:22 am ] |
| Post subject: | Re: 74 h1 "The Project" |
wow i was just looking over your posts on your bike. you are quite the artist and i like how your go the extra step to make it right. it may take longer and not what everyone else would do but it will look fantastic |
|
| Author: | oxford [ Mon Mar 16, 2015 2:56 pm ] |
| Post subject: | Re: 74 h1 "The Project" |
^^^^, Thanks. |
|
| Author: | oxford [ Sat May 02, 2015 9:23 pm ] |
| Post subject: | Re: 74 h1 "The Project" |
I started to make a dent on the front end of this bike and figured I would start from the top down. Here's what I started with, a 2"x6"x12" block of aluminum. It actually was a waste of material but it is what I had to start with.  I took it down to 1.5"x6"10"  Drilled a couple of holes  Here they are bored to size  Getting close 
|
|
| Author: | oxford [ Sat May 02, 2015 9:23 pm ] |
| Post subject: | Re: 74 h1 "The Project" |
Here it is all finished up. I still need to add the steering stops but I will wait until this is on the bike to mark it and get them in the right spot. The stem is from a stock set of clamps that I cut up. All in all the goal was to make it a little more modern while still having a stock type look to it. I think it came out pretty nice.      
|
|
| Author: | kawi3cyl [ Sat May 02, 2015 11:49 pm ] |
| Post subject: | Re: 74 h1 "The Project" |
Jeff, there is a single word to describe your creative and machining skills...WOW!  
|
|
| Author: | mikeof [ Sun May 03, 2015 1:45 pm ] |
| Post subject: | Re: 74 h1 "The Project" |
i agree. what bike disks and calipers are those from in your pic? i've always wanted to change mine over. but could never get two calipers that matched. do you make these and sell them. thanks |
|
| Author: | oxford [ Sun May 03, 2015 3:14 pm ] |
| Post subject: | Re: 74 h1 "The Project" |
The rotor is from a Honda CBR 600rr and the caliper is a universal Brembo 65mm. These calipers came standard on most European sportbikes before radial mount calipers took over. Most of these calipers are gold colored from the factory, this one was factory black. These are very easy to find as matching sets as all the sportbikes were dual discs. They are not that easy to make work on these bikes. I do not have any of these for sale and don't plan on making any. I do have a set of 2 piston Brembos for sale, here is the link to them. viewtopic.php?f=27&t=4580 |
|
| Author: | don k [ Mon May 04, 2015 1:44 am ] |
| Post subject: | Re: 74 h1 "The Project" |
The Honda rotor is a bolt on to the Kawi hub? Tks. |
|
| Author: | oxford [ Mon May 04, 2015 6:22 pm ] |
| Post subject: | Re: 74 h1 "The Project" |
don k wrote: The Honda rotor is a bolt on to the Kawi hub? Tks. No, it is not a direct fit. If you go through the thread the details on it are in there. |
|
| Author: | oxford [ Fri May 08, 2015 9:24 pm ] |
| Post subject: | Re: 74 h1 "The Project" |
Thanks for the compliments. For anyone interested here are the highly detailed and organized drawings I make to create these parts.   
|
|
| Page 9 of 13 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|