| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Wheel spacers and axles.... H2/Z1 http://www.kawi2strokes.com/forum/viewtopic.php?f=16&t=13253 |
Page 1 of 1 |
| Author: | mizike77 [ Wed Jan 17, 2018 6:02 pm ] |
| Post subject: | Wheel spacers and axles.... H2/Z1 |
Im using old aftermarket wheels for my build. They came from a Z1. So, im fiddling with spacers and such. It looks to me so far that the right side wheel spacer is shorter on the H2 than the Z1. Also, the axle and inner cush drive spacer is shorter. I guess my question is wether or not the sprocket carriers are the same. I put it all together with the H2 Spacers and axle, the snugged the axle nut for a test fit and the wheel was turning tightly. The only Z1 parts left are the sprocket carrier and brake drum. But I always thought they were the same. |
|
| Author: | Brian H. [ Sun Jan 12, 2020 11:42 pm ] |
| Post subject: | Re: Wheel spacers and axles.... H2/Z1 |
Sprocket carrier for H2 is not as thick as Z1, and uses a shorter spacer. Brake plate should be the same. Z1 rear hub is same as H2B/C. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|