| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| ex500 brake bolt size? http://www.kawi2strokes.com/forum/viewtopic.php?f=16&t=12973 |
Page 1 of 1 |
| Author: | H-nube [ Mon Jul 24, 2017 12:27 pm ] |
| Post subject: | ex500 brake bolt size? |
Doing the ex500 conversion. This is a basket case bike with no bolts. I looked on the conversion site and there are no bolt specs listed except the 10mmx125 thread size for the one hole. The other hole in the caliper is not drilled or tapped yet as it was an NOS unit so I want to make sure what to use. Any insight on this is appreciated and the video was good by the way on how to do this. |
|
| Author: | Jim [ Mon Jul 24, 2017 1:39 pm ] |
| Post subject: | Re: ex500 brake bolt size? |
They're all M10x1.25 but I don't know the lengths. I had some fully threaded high strength bolts and cut them to length as I installed each one. |
|
| Author: | H-nube [ Mon Jul 24, 2017 4:46 pm ] |
| Post subject: | Re: ex500 brake bolt size? |
Thanks Jim. I need to order one of your regulators. |
|
| Author: | H-nube [ Tue Jul 25, 2017 12:20 pm ] |
| Post subject: | Re: ex500 brake bolt size? |
15mm length for the center bolt, 30mm length for the outer bolts for the record. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|