Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
My 102 rwhp 72 H2 with Denco replicas. http://www.kawi2strokes.com/forum/viewtopic.php?f=16&t=12463 |
Page 3 of 5 |
Author: | Jim [ Tue Feb 07, 2017 10:33 am ] |
Post subject: | Re: My 102 rwhp 72 H2 with Denco replicas. |
Jørgen, a customer sent me some photos of his new stainless Denco replicas we made for him. Obviously he had them polished. Before: After: |
Author: | m in sc [ Tue Feb 07, 2017 11:57 am ] |
Post subject: | Re: My 102 rwhp 72 H2 with Denco replicas. |
im going to have to talk to jim l about those blue wires... |
Author: | jyrgNorway [ Tue Feb 07, 2017 1:55 pm ] |
Post subject: | Re: My 102 rwhp 72 H2 with Denco replicas. |
Wow, those are such classy and nice looking pipes. Your welder must be VERY talented as well |
Author: | Jim [ Tue Feb 07, 2017 2:07 pm ] |
Post subject: | Re: My 102 rwhp 72 H2 with Denco replicas. |
Thanks Jorgan. It's always fun for me to see them mounted on a customer's triple. |
Author: | husson73 [ Wed Feb 08, 2017 7:00 am ] |
Post subject: | Re: My 102 rwhp 72 H2 with Denco replicas. |
when will you make Denco RR copy |
Author: | Jim [ Wed Feb 08, 2017 8:38 am ] |
Post subject: | Re: My 102 rwhp 72 H2 with Denco replicas. |
At this point, it's not even clear that Denco ever produced RR pipes. I've seen one photo that appears to show a standard set that was modified by someone. |
Author: | kawi3cyl [ Wed Feb 08, 2017 1:37 pm ] |
Post subject: | Re: My 102 rwhp 72 H2 with Denco replicas. |
Jim wrote: At this point, it's not even clear that Denco ever produced RR pipes. I've seen one photo that appears to show a standard set that was modified by someone. The plus side of that Jim is that you could therefore conceivably be the first and originator of these non-existent pipes, if in fact nobody can solidly document the RR's were ever mass produced. Bottom line is they would probably sell. |
Author: | Ja-Moo [ Wed Feb 08, 2017 6:48 pm ] |
Post subject: | Re: My 102 rwhp 72 H2 with Denco replicas. |
Tony said he made one set for himself, there were never production RR pipes....... |
Author: | jyrgNorway [ Thu Feb 09, 2017 2:58 am ] |
Post subject: | Re: My 102 rwhp 72 H2 with Denco replicas. |
At least several were made, but may have been copies. |
Author: | scrambler73 [ Sat Feb 11, 2017 5:51 pm ] |
Post subject: | Re: My 102 rwhp 72 H2 with Denco replicas. |
Ja-Moo wrote: Tony said he made one set for himself, there were never production RR pipes....... Huh? I've had 3 or 4 sets of Denco Roadrace pipes over the years. I have an original Denco brochure somewhere that lists them as "pipe kits" where they sold sections and those goofy rear hangers.... but I would bet good money there were sets that were welded at the Fremont shop. All of the pipes I've owned had "denco-quality" welds... Meaning, the welding looked like the SS and Killer welds. None of them were home-jobs, that is for absolute certain. A couple of sets (that appeared to never have been altered/modified) even had DENCO stickers. Not to mention the gold-colored zinc plating of the manifolds matched regular street/killer pipes as well. Denco RR pipes do exist. This set of pipes are believed to be the last set of chambers to leave Denco AFTER they closed. A local guy (here in Minnesota) had ordered these pipes and had a set of Cylinders being ported when the bank closed the doors. Rusty Jones was able to get into the building, get the guys pipes and cylinders and finished the porting... I believe he then went on to start "Flo-Power".. The cylinders had "Denco King Cobra" stamped on them along side "Flo-Power". |
Page 3 of 5 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |