| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| 69 mild mods... http://www.kawi2strokes.com/forum/viewtopic.php?f=16&t=12457 |
Page 1 of 1 |
| Author: | mizike77 [ Thu Feb 02, 2017 7:58 am ] |
| Post subject: | 69 mild mods... |
Freshening up my 69. Has chambers (unknown brand) and mild porting with the bridged port removed. Bore is 60.5 with Wossners. Im thinking about carb / intake mods and possible ignition upgrades. Nothing crazy, just want a snappy little noisy bike for fun to bring to the local bike nights. Im not riding it regularly or commuting on it. So power delivery and ride-ability aren't really a concern. |
|
| Author: | Ja-Moo [ Thu Feb 02, 2017 1:12 pm ] |
| Post subject: | Re: 69 mild mods... |
Your ignition should be fine, it is a good unit if CDI. But their may be an upgrade soon from Lakeland. (Jim here on the board) Bigger carbs are a good idea, if nothing else to get rid of the horrible stock carbs. 30 flats would be great for mild porting and pipes. 
|
|
| Author: | mizike77 [ Thu Feb 02, 2017 6:19 pm ] |
| Post subject: | Re: 69 mild mods... |
Ja-Moo wrote: Your ignition should be fine, it is a good unit if CDI. But their may be an upgrade soon from Lakeland. (Jim here on the board) Bigger carbs are a good idea, if nothing else to get rid of the horrible stock carbs. 30 flats would be great for mild porting and pipes. Are there 30mm flat slides available? I have only seen the cheapo chinese versions. Anything from Mikuni or Khien ? Yes it still retains the stock CDI. I have no idea if it works yet as I havnt gotten that far yet. It had plug wires and caps dangling when I got it. The rotor is a bit wonkey as well. Thought I would get the engine done on the bench and finish up paint first, then deal with the ignition and carbs once its back in the frame. |
|
| Author: | Ja-Moo [ Thu Feb 02, 2017 6:56 pm ] |
| Post subject: | Re: 69 mild mods... |
I was cross thinking with the VM's, 32 is the smallest flat, there are also the 30 VM's, and those are fine also. |
|
| Author: | jyrgNorway [ Fri Feb 03, 2017 11:19 am ] |
| Post subject: | Re: 69 mild mods... |
The Mikuni TMX30 would be an option maybe. At least TMX38 works extremely well on a H2. |
|
| Author: | Ja-Moo [ Fri Feb 03, 2017 11:47 am ] |
| Post subject: | Re: 69 mild mods... |
A lot of guys also look at investment dollars. The VM 30's are around 82.00 each, the TMX are around 162.00, or double the cost. (not including tuning brass) |
|
| Author: | mizike77 [ Fri Feb 03, 2017 7:30 pm ] |
| Post subject: | Re: 69 mild mods... |
VM30 is a rubber mount, and the bike has the bolt on spigots. Is a rubber coupler the way? Any clearance issues to the case ect? |
|
| Author: | Ja-Moo [ Fri Feb 03, 2017 8:21 pm ] |
| Post subject: | Re: 69 mild mods... |
Adapters are needed. I make them. 129.00 a set. And also the rubber manifolds from Sudco are needed.
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|