Cool! Looks like fun - keep the pics coming.
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Rubbadubs Overkill http://www.kawi2strokes.com/forum/viewtopic.php?f=16&t=11312 |
Page 1 of 9 |
| Author: | Rubbadub [ Wed Jan 20, 2016 7:14 am ] |
| Post subject: | Rubbadubs Overkill |
Attachment: frame rolling 12.JPG Attachment: frame rolling 11.JPG Hello Guys, Those of you on the UK forums know me, not posted on here much. However it has been suggested that you might be interested in my H2 in an H1 frame, featuring a Ducati M900 front end, Triumph T595 swing arm, Ducati 1098 tailpiece. Heres a couple of pics to give you a flavour |
|
| Author: | Rubbadub [ Wed Jan 20, 2016 7:18 am ] |
| Post subject: | Re: Rubbadubs Overkill |
and also.... Attachment: seat side view 2.jpg
|
|
| Author: | rngdng [ Wed Jan 20, 2016 7:24 am ] |
| Post subject: | Re: Rubbadubs Overkill |
HOLY CRAP!!! Lane |
|
| Author: | BarryB [ Wed Jan 20, 2016 7:27 am ] |
| Post subject: | Re: Rubbadubs Overkill |
Cool! Looks like fun - keep the pics coming.
|
|
| Author: | Rubbadub [ Wed Jan 20, 2016 7:30 am ] |
| Post subject: | Re: Rubbadubs Overkill |
Hope thats good crap not bad crap. I have lots of pictures of this if you guys are intersted let me know. The frame is nearly finished. Just having the 2 stroke tank fabricated, hopefully will have some pictures of that soon.... Attachment: Phat back tyre.jpg
|
|
| Author: | H2RTuner [ Wed Jan 20, 2016 7:34 am ] |
| Post subject: | Re: Rubbadubs Overkill |
Looks like it should go around a corner very, very well. Nice work. |
|
| Author: | Rubbadub [ Wed Jan 20, 2016 7:36 am ] |
| Post subject: | Re: Rubbadubs Overkill |
This is how the frame ended up, massively cross braced I know. Originally was an H1 frame but ended up being fairly radical with it. Attachment: Frame on Garden table.jpg Oh and one of the rear suspension. The shock is a Nitron unit, developed by Lotus for their racing teams. I think Ohlins are great but they seen very expensive to me. Attachment: rear suspension with Nitron.jpg We had to dish the rear sprocket to alleviate some of the front sprocket offset. Attachment: dished sprocket mounted 1.jpg
|
|
| Author: | Ja-Moo [ Wed Jan 20, 2016 10:38 am ] |
| Post subject: | Re: Rubbadubs Overkill |
I have been following on the Brit board, talk about an ordeal! I hope yo have some hair left. And thanks for posting here, it's great you are sharing your project! 
|
|
| Author: | Rubbadub [ Wed Jan 20, 2016 12:00 pm ] |
| Post subject: | Re: Rubbadubs Overkill |
Cheers John, yes its my own fault as I have not learned how to weld, lack of space and equipment and will i guess which puts me at the mercy of others. The good news is that the chap that has stitched this together is bloody good, the bad news is it progresses at his pace. Still nearly done on the "chassis", Engine is a 74 motor, drilled to take a set of tuned 73 Barrels(from Gary Clarke) and using a set of VM34 Flat slides. Engine is converted to Rubber mounting and have a couple of other little tweaks, secret for now, but pretty low key compared to sum of the stuff this lot on here get up to with zeetronic doodads and reed inducted cases. Attachment: engine with flatsldes.JPG
|
|
| Author: | Rubbadub [ Wed Jan 20, 2016 7:30 pm ] |
| Post subject: | Re: Rubbadubs Overkill |
Attachment: image.jpeg This is the first H2 I built, regrettably I sold it plus another that I built, really I wasn't using them, h2s in standard trim are ok, but not great, and with prices for even a bitsa clearing $12k for my second build and $15k for this one I moved them on and decided to build this special. Sometimes I regret it, but on the whole I am looking forward to the new build |
|
| Page 1 of 9 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|