Kawi2strokes.com Forum
http://www.kawi2strokes.com/forum/

Pipeset from Andrew finished today
http://www.kawi2strokes.com/forum/viewtopic.php?f=16&t=10514		 Page 1 of 2
Author:  Ralf Gille [ Fri May 22, 2015 12:38 pm ]
Post subject:  Pipeset from Andrew finished today
Hi,

today I finished a pipeset from Andrew for my girlfriends S1A-400. The silencers I took from Tyga.
Hope that I have time to test it tomorrow.

All the best from Germany
Ralf

http://www.gille-restauration.de

Image


Image


Image


Image


Image


Image
Author:  Ja-Moo [ Fri May 22, 2015 1:40 pm ]
Post subject:  Re: Pipeset from Andrew finished today
Those are looking sharp! :thumbup: :thumbup: :thumbup:
Author:  Tim Steele [ Fri May 22, 2015 1:51 pm ]
Post subject:  Re: Pipeset from Andrew finished today
Very nice!!!
Author:  Ralf Gille [ Fri May 22, 2015 4:25 pm ]
Post subject:  Re: Pipeset from Andrew finished today
John,

checked the reedkits of this bike today, everything is fine. Now I will see how the performance is. Than I have to look for some HP, because
the main problem is that the others in the class 350/400 had done a lot last two years and are very fast.
Our bike has just own heads, reeds and a clean up. But it's not to slow. Second problem is that she couldn't sit on her bike, because of her knee
problems. It's along way for recovering. But I told her when we have our triple meeting in August, we could start her bike and she only has to
pull the throttle wide open.
I let you know how it will end,

All the best from Germany
Ralf

http://www.gille-restauration.de
Author:  husson73 [ Sat May 23, 2015 7:48 am ]
Post subject:  Re: Pipeset from Andrew finished today
Walms pipes so :mrgreen:
Author:  Walms [ Sat May 23, 2015 7:52 am ]
Post subject:  Re: Pipeset from Andrew finished today
It's a sweet bike Ralf, nice job with the fabrication!
Looking forward to the ride report. :)
Author:  Ja-Moo [ Sat May 23, 2015 11:04 am ]
Post subject:  Re: Pipeset from Andrew finished today
Ralf Gille wrote:
John,

checked the reedkits of this bike today, everything is fine. Now I will see how the performance is. Than I have to look for some HP, because
the main problem is that the others in the class 350/400 had done a lot last two years and are very fast.
Our bike has just own heads, reeds and a clean up. But it's not to slow. Second problem is that she couldn't sit on her bike, because of her knee
problems. It's along way for recovering. But I told her when we have our triple meeting in August, we could start her bike and she only has to
pull the throttle wide open.
I let you know how it will end,

All the best from Germany
Ralf

http://www.gille-restauration.de


Good to hear Ralf. And you know how guys are, they don't like getting beaten by the fairer sex. ;) Your gal showed them how it was done for a couple of years, so of course they are upping their game. Hope your lady heals well and quickly.......... :thumbup:
Author:  Trilogymac [ Mon May 25, 2015 12:15 pm ]
Post subject:  Re: Pipeset from Andrew finished today
Beautiful bike.
Always thought though, that the curved rearward pipe protruding out of the silencers would look better either straight or removed. I think it would give it a more "old school" look.
Author:  ThreePipesSmokin [ Mon May 25, 2015 2:30 pm ]
Post subject:  Re: Pipeset from Andrew finished today
Trilogymac wrote:
Beautiful bike.
Always thought though, that the curved rearward pipe protruding out of the silencers would look better either straight or removed. I think it would give it a more "old school" look.

I think they look right for upswept pipes like this S3 has, but for lower, straighter pipes I agree with your statement. Sweet S3! I'm rather a fan of the 400's myself! :thumbup:
Author:  usernameandpassword [ Fri May 29, 2015 8:59 pm ]
Post subject:  Re: Pipeset from Andrew finished today
What carbs did you use on that bike? :eh: I have VM30-83s tied to Moos reeds and they are a shade big for the area with that big plug on the bottom.

If that thing runs as good as mine, you're in for a real treat of a bike over the stock 400 setup. 8-)
Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/